Overview
Kenton KH-45AS digital display electric air blowing dryer is a device with microcomputer intelligent PID control technology, with temperature control, timing and over-temperature alarm functions. It is suitable for routine experiments and tests, and is cost-effective for drying, heat treatment and heating in various industries.
Features
1. Using microcomputer intelligent PID control technology, the system has temperature control, timing, over-temperature alarm functions;
2. The external hot air circulation system is composed of low-noise fans and air ducts, and the reasonable air duct and circulation system make the temperature in the working room stable;
3. Cold rolled steel plate with good electrostatic spray treatment, the overall design is beautiful and novel, and has a large viewing window;
4. The liner is divided into two types of mirror stainless steel and galvanized steel plate, and the semi-arc four corners are easy to clean;
5. The shelf spacing and shelf number in the working room can be adjusted to facilitate access to samples of different specifications;
6. Using high temperature silicone as the sealing edge of the door, high temperature heating tube as the heating element to ensure safety and longer service life;
7. Ergonomic fastening handle, easy to operate, and ensure sealing.
Principle
The equipment precisely adjusts the temperature through microcomputer intelligent PID control technology, and combines the external hot air circulation system to achieve uniform distribution of hot air by low-noise fans and air ducts to ensure stable temperature in the workplace. The high-temperature heating tube is used as a heating element, and cooperates with the sealing door edge and circulation system to achieve efficient heating and temperature control.
Applications
Drying, heat treatment, heating in various industries, biology, agriculture, scientific research and other departments
Steps
1. Connect the power supply and ensure that the voltage is 220V.
Open the device and set the required temperature (RT + 5~ 250 ° C) and timing time (0~ 999 minutes) through the microcomputer control panel.
3. Place the sample on the adjustable shelf and close the sealing door;
4. Start the equipment to monitor temperature fluctuations and alarm functions.
5. Turn off the power after use and clean the liner.
Notice
• Flammable, explosive and volatile items are strictly prohibited from being heated and dried in the box to avoid explosion;
• For heating high-value materials, it is recommended to install an independent temperature limiter, set the maximum temperature limit, and double insurance to ensure material safety;
• Not suitable for volatile, flammable, explosive and other items;
• Regularly check the equipment sealing and heating elements to ensure safe use.
