Overview
HENGLI JHP-2 Laminar Flow Cabinet is a device specially designed for product protection fields such as biotechnology, life science and precision electronics. It combines good airflow mechanics design to create a local purification working environment for operators, complies with Australian AS1386.5 and European Union EN12469 standards, the cleanliness level reaches the international ISO14644.1 standard CLASS 5 (US LIANBANG 209E, class 100), and has passed the European Union CE safety certification and enjoys a 2-year mass warranty period.
Features
1. SANGMA microcomputer control technology: integrated LCD point array large-screen LCD display, real-time display of parameter status; with sterilization, lighting interlock function to protect the safety of operators; multi-level adjustable wind speed.
2. CLEANFLOW clean airflow technology: using centrifugal wind turbine low energy consumption motor, low noise operation; reasonable air duct design to ensure uniform and stable airflow; standard initial effect and effective double filter element, effective Filter interception efficiency of 99.99%.
3. Ergonomic structural design: circular arc design concept to increase operating comfort; adjustable movable mesh Shelf; double door design (incubator series).
4. Easy to clean: The liner is clean and easy to clean, and the activity can be extracted from the multi-layer shelf design.
5. Easy maintenance: The LCD microcontroller has a diagnostic function, and the electrical control components are easy to maintain.
6. Safe and effective protection concept: multiple over-temperature protection functions, sound and light alarm; all electronic components have passed UL certification; over-temperature protection devices comply with German DIN 12880 Class 3.1 standard.
7. Pro-Bright professional lighting system: simulate natural light, Illumrination degree grading is adjustable; lamp and liner are effectively insulated by double-decked Glass.
Principle
Laminar Flow Cabinet adopts CLEANFLOW clean air flow technology, adopts centrifugal wind turbine low energy consumption motor and circular arc large diameter into the trend design to reduce disturbance and ensure low noise operation. The reasonable air duct design and optimized net pressure box cooperate with the micro mesh layer to flow out the wind plate to ensure uniform and stable air flow. Standard primary effect filter avoids dust particles from entering, prolongs the life of effective HEPA filter, and the interception efficiency reaches 99.99%. The equipment can be equipped with two modes of vertical air flow and horizontal air flow to provide local purification environment for the operation area.
Applications
Biotechnology, Life Sciences, Precision Electronics
Standards
Australian AS1386.5, European Union EN12469, International ISO14644.1 CLASS 5 (US LIANBANG 209E, Class 100), German DIN 12880 Class 3.1
Steps
1. Connect power supply: use AC single-phase 220V/50HZ power supply.
2. Turn on the device: start through the LCD control panel to monitor parameters such as lighting, sterility, and air volume in real time.
3. Adjust the wind speed: Adjust the wind speed to the range of 0.1 to 0.6m/s in multiple stages according to demand.
4. Use the lighting system: Adjust the Illumrination degree of the Pro-Bright lighting system as needed.
5. Clean after operation: Clean the liner and movable shelf after use to ensure hygiene.
Notice
• The working environment should be at a temperature of 10~ 30 ° C, relative humidity below 70%, and no obvious vibration and dust.
• Avoid direct exposure to UV Lamp, the equipment has sterilization and lighting interlock functions to prevent burns.
• Regularly check the initial effect and effective Filter to ensure the efficiency of the filtrate.
• During maintenance, pay attention to the electrical control components located at the back of the box and follow safety procedures.
• When the over-temperature protection device is triggered, deal with the sound and light alarm in time.
