Overview
CH-1 digital thermostatic water bath is made of 304 stainless steel one-time stretch forming liner, no water leakage, good corrosion resistance. Equipped with stainless steel cover and silicone ring cover, hidden outlet pipe, four corners and bottom arc design to avoid temperature control dead ends. The shell adopts cold-rolled plate surface spraying, the outer arc design is beautiful and generous, and the anti-drop and pressure resistance is strong. High temperature control accuracy, digital display, automatic temperature control.
Features
1.304 stainless steel liner one stretch forming, no leakage, corrosion resistance
2. Stainless steel cover and silicone ring cover, high temperature is not hot
3. Concealed outlet pipe design
4. Four corners and bottom arc design to avoid temperature control dead ends
5. Digital display, automatic temperature control, high temperature control accuracy
6. The shell is drawn and extruded at one time, and the surface is sprayed with plastic, which is beautiful and durable
7. Outer arc design, strong anti-drop and pressure resistance, easy to clean
Principle
The water in the Tank is heated by the heating element, and the digital temperature control system is used to automatically adjust the temperature to maintain the thermostatic state of the water bath. The arc design at the four corners and bottom ensures that the water temperature is evenly distributed and local temperature differences are avoided.
Applications
Drying, condensing, distillation, impregnation of chemical Reagents, impregnation of drugs and biological products, water bath thermostatic heating, temperature testing, biological laboratory, genetic laboratory, virus laboratory, aquatic laboratory, environmental protection laboratory, biochemical laboratory, analysis room, education and scientific research
Steps
1. Water bath on a stable countertop
2. Add Appropriate Water to Tank
3. Turn on the power supply and turn on the power switch
4. Set the required temperature value
5. Wait for the temperature to reach the set value and start using it.
6. Turn off the power after use and clean the equipment
Notice
Make sure there is enough water in the Tank before use
• Avoid turning on the heating in an anhydrous state
• Pay attention to prevent burns when using
• Regularly clean and maintain equipment
• Power frequency must meet AC 220V 50Hz requirements
• Handle with care when handling to avoid collisions
