Overview
78-2 Two-way magnetic heating Stirrer adds two-way stirring function on the basis of the original magnetic heating Stirrer, which is more uniform and effective. The product adopts stepless speed regulation, which is easy to operate, and can precisely and stably stir liquid solutions in a wide speed range, especially suitable for stirring small volumes of samples.
Features
1. With two-way mixing function, mixing is more uniform and effective.
2. Adopt stepless speed regulation, easy to operate.
3. It can achieve precise and stable mixing over a wide speed range.
4. It is particularly suitable for stirring small-volume samples.
Principle
The device drives the magnetic stirrer swirl/spin placed in the container through the magnetic drive device at the bottom, so as to realize the stirring of the liquid. The heating function heats the bottom of the container through the built-in heating plate to realize the synchronization of stirring and heating.
Applications
Petroleum, chemical, environmental protection, biochemical laboratories, analysis rooms, education and research
Steps
1. Place the device on a stable table and connect the 220V power supply.
2. Place the container containing the solution in the center of the work plate.
3. According to the experimental requirements, select the appropriate magnetic stirrer into the container.
4. Turn on the power switch.
5. swirl/spin speed knob, gradually adjust from low speed to the desired Rotation speed.
6. If heating is required, turn on the heating switch and adjust the Heating power.
7. After use, first reset the speed regulation and heating knobs to zero, and then turn off the power switch.
Notice
• Power supply voltage is 220V 50Hz.
Equipment should be placed on a smooth, drying, ventilated countertop.
When adjusting the speed, you should start at a low speed and gradually increase it to avoid sudden high-speed start.
• The bottom of the container should be flat and in good contact with the heating plate to ensure mixing effect and heating efficiency.
• Do not touch the heating plate and high temperature container when heating to prevent burns.
• Do not place heavy objects on the device or allow liquids to flow into the device.
• The working surface should be cleaned in time after use.
• If not in use for a long time, please disconnect the power supply and store it properly.
