Overview
BDJK HMS-901D double heating Magnetic Stirrer is driven by NanoHeat world-class thermal energy technology, no mechanical heating components, dry burning and no electromagnetic field interference and harm. The device has ultra-fast heating technology, uniform plate surface temperature, LED display can set the specified temperature, built-in and external temperature Probe can be freely switched, suitable for heating Stir of Glass, Pottery and porcelain and metal utensils.
Features
1. Adopt NanoHeat world-class thermal energy technology, no mechanical heating components, dry burning, no electromagnetic field interference and harm
2. Ultra-fast heating technology, the temperature increases at a rate of 5 ° C per second, the plate surface temperature is uniform, and the liquid temperature difference is accurate to 0.1~ -0.5 ° C.
3. LED display, the specified temperature can be set, the built-in temperature Probe and the external temperature Probe can be freely switched
4. Over-temperature alarm function and thermometer setting function
5. German Schott Microcrystalline Pottery and porcelain board surface, acid, alkali, corrosion resistance, easy to clean
6. Stirring performance is stable, using DC motor, low noise, long life, low speed stable, high speed strong, speed digital display, stepless speed regulation
7. Free from magnetic interference and hazards, suitable for most electrical appliances: Glass, Pottery and porcelain and metal utensils
Principle
The heating Magnetic Stirrer uses NanoHeat thermal energy technology implementation to heat without mechanical heating components, and uses magnetic force to drive the Stir to swirl/spin in the container to achieve uniform Stir and rapid heating. The built-in and external temperature Probe can be switched, and the temperature is precisely controlled to ensure the stability and reliability of the experimental process.
Applications
Industrial, agricultural, chemical, biological and other experimental heating and Stirring
Steps
Connect the power supply and ensure that the voltage is 220V or 110V.
2. Stir and container on the work surface
3. Set the desired temperature and speed through the LED display
4. Select Built-in or External Temperature Probe for Temperature Control
5. Start equipment, monitor heating and Stirring process
6. Turn off the power after use and clean the board surface
Notice
• Ensure that the Ambient Temperature is within the range of 5 ℃~ 40 ℃
• The environment humidity should be less than 90%
• Max. stirring Capacity is 5L * 2 to avoid overloading
• Stir the appropriate size, the maximum length does not exceed 80mm
• Pay attention to the over-temperature alarm function to prevent the temperature from being too high
• Use mild detergent when cleaning to avoid damage to Microcrystalline Pottery and porcelain panels
