Overview
AISRY LX-5611 DIN wear resistance tester is a device used to test the wear resistance performance of materials such as resilience materials, rubber, tires, conveyor belts, transmission belts, soles, soft synthetic leather, leather, etc. The machine has the characteristics of high efficiency, good reproducibility and easy operation.
Features
1. Suitable for wear resistance testing of various resilience and soft materials.
2. High performance and good test reproducibility.
3. Easy to operate and easy to use.
Principle
Rotation speed swirl/spin, while the test piece clamp is applied to a predetermined test load (e.g., 5N) on the roller, and accompanied by lateral displacement, the material is simulated in actual use abrasion process to evaluate its wear resistance performance.
Applications
Resilience materials, rubber, tires, conveyor belts, drive belts, soles, soft synthetic leather, leather
Standards
DIN-53516、ISO/DIS-4649、GB-9867
Steps
Prepare the required test piece (diameter φ 16 mm, thickness 6-15 mm).
2. Install the test piece on the fixture.
3. Set the test load (e.g. 5N) according to the test requirements.
4. Start the machine, the roller runs at 40rpm Rotation speed for abrasion test.
5. After the test is completed, remove the test piece to evaluate the abrasion.
Notice
• Power supply voltage is 220V 50HZ.
• When installing the test piece, ensure that the size meets the requirements (diameter φ 16 mm, thickness 6-15 mm).
• Select the appropriate test load (e.g. 2.5N, 5N, 10N) according to the test criteria.
• Please pay attention to safety during operation and avoid touching moving parts.
• Regular maintenance of equipment to ensure Test accuracy.
