Overview
LICHEN DHS-10A Moisture Analyzer is an electronic halogen moisture rapid measuring instrument using the principle of halogen lamp pyrolysis weight. The instrument rapidly dries the sample through the halogen lamp heating unit and water evaporation channel while measuring the weight of the sample, and continuously measures and displays the percentage of water loss in real time. After the drying procedure is completed, the final Moisture content value is locked. Compared with the international oven heating method, its heating is fast, high efficiency, and the detection result has good conformity. Generally, the sample can be measured in a few minutes. The operation is simple, the test is accurate, and it can display multiple data and has the function of connecting computers and printers.
Features
1. The dual-drive ultra-quiet opening of the fully automatic heating cabin door prevents the impact of artificial flip-off on weighing and meets the requirements of automatic testing.
2.5 inch high definition intelligent touch display, Linear dispersion real-time dynamic analysis, direct display moisture percentage, dry weight percentage, dry weight weight.
3. The heating temperature can reach up to 180 ° C, meeting the vast majority of sample testing requirements.
4. The last 9 sets of test records can be stored and retrieved at any time, and the test results can be printed.
5. Capacity value up to 50g (110g for model DHS-20A).
6. Adopt Mouth Weighing Sensor.
7. The use of stainless steel to heat the inner compartment helps to improve the efficiency of sample testing.
Principle
The Moisture Analyzer uses the halogen lamp pyrolysis weight principle. During the measurement process, the instrument continuously weighs the sample while the halogen lamp heating unit generates heat to rapidly dry the sample through the water evaporation channel. The instrument monitors and calculates the weight of the sample lost during the drying process in real time, and instantly converts the lost moisture into Moisture content percentage for display. When the drying procedure (which can be set to timing or automatic mode) is completed, the final measured Moisture content value is locked and displayed.
Applications
The information does not mention specific Applications.
Standards
The data did not mention specific compliance criteria.
Steps
The information does not provide detailed operation steps.
Notice
The information did not provide specific precautions.
