Overview
LICHEN DHS-16 Moisture Analyzer is an electronic halogen moisture rapid meter using the principle of halogen lamp pyrolysis weight. The instrument rapidly dries the sample through the halogen lamp heating unit and water evaporation channel while measuring the weight of the sample, and continuously measures and displays the percentage of water loss in real time. After the drying procedure is completed, the final Moisture content value is locked. Compared with the international oven heating method, its heating is fast, the detection result has good conformity with the national standard oven method, and the detection efficiency is higher. Generally, the sample can be measured in a few minutes. The instrument is easy to operate and accurate in testing. It can display data such as moisture value, drying value, measurement time, temperature value, etc., and has the function of connecting with computers and printers.
Features
1. The dual-drive ultra-quiet opening of the fully automatic heating cabin door prevents the impact of artificial flip-off on weighing and meets the requirements of automatic testing.
2. Equipped with 5-inch high definition intelligent touch display, Linear dispersion real-time dynamic analysis, direct display of moisture percentage, dry weight percentage, dry weight weight.
3. The upper heating temperature reaches 180 ° C, meeting the vast majority of sample testing requirements.
4. 9 sets of recent test records can be stored and retrieved at any time, and the test results can be printed.
5. Capacity up to 50g.
6. The use of stainless steel to heat the inner compartment helps to improve the efficiency of sample testing.
Principle
The Moisture Analyzer works based on the pyrolytic weight principle. During the measurement process, the instrument continuously weighs the initial weight of the sample while the halogen lamp heating unit generates heat to rapidly dry the sample through the water evaporation channel. The instrument monitors and calculates the weight lost during the heating process in real time and immediately converts the weight loss to Moisture content percentage displayed. When the drying procedure is completed (the set conditions are reached), the final measured Moisture content value is locked and displayed.
Applications
This information is not mentioned in the information provided.
Standards
This information is not mentioned in the information provided.
Steps
This information is not mentioned in the information provided.
Notice
This information is not mentioned in the information provided.
