Overview
LICHEN DHS-20A halogen fast moisture meter is an electronic moisture detection instrument using the principle of halogen lamp pyrolysis weight. It rapidly dries the sample through the halogen lamp heating unit and water evaporation channel while measuring the weight of the sample, and continues to measure and display the percentage of water loss in real time. After the drying procedure is completed, the final Moisture content value is locked. Compared with the international oven heating method, the detection result has good conformity and higher efficiency. Generally, the sample can be measured in a few minutes. The operation is simple and the test is accurate. It can display a variety of data and has the function of computer and printer connection.
Features
1. The dual-drive ultra-quiet opening of the fully automatic heating cabin door prevents the impact of artificial flip-off on weighing and meets the requirements of automatic testing.
2.5 inch high definition intelligent touch display, Linear dispersion real-time dynamic analysis, direct display moisture percentage, dry weight percentage, dry weight weight.
3. The heating temperature can reach up to 180 ° C, meeting the vast majority of sample testing requirements.
4. The last 9 sets of test records can be stored and retrieved at any time, and the test results can be printed.
5. Capacity up to 110g, to meet the large sample volume test.
6. Adopt Mouth Weighing Sensor.
7. Adopt stainless steel to heat the inner compartment to improve the efficiency of sample testing.
Principle
The moisture meter works on the principle of halogen lamp pyrolysis weight. In the measurement process, the instrument quickly dries the sample using the heat generated by the halogen lamp heating unit and the optimized water evaporation channel while weighing the sample in real time. During the drying process, the instrument continuously measures the sample weight reduction due to water evaporation, and instantly calculates and displays the percentage of Moisture content lost by the sample. When the drying procedure is completed (can be completed according to set conditions such as timing or automatic judgment), the final measured Moisture content value is locked and displayed.
Applications
No Specific Applications are mentioned.
Standards
No specific compliance criteria were mentioned.
Steps
No specific operation steps are mentioned.
Notice
No specific precautions were mentioned.
