Overview
XFMD-2201B Touch Screen Solid Density Meter is a precision measuring instrument using the principle of Archimedes water replacement method. This machine is mainly used in rubber, plastic, Wire and cable, oil bearing, composite, cosmetics, shoe material, Glass, Precious metal Hardware recycling, powder metallurgy materials, magnetic materials and other industries. It can directly read the average weight in air, average weight in water, density value and volume of solid, granular, thin film, floating body, powder sample.
Features
1. Using touch screen operation, human-machine interaction is convenient.
2. Based on the principle of aquimi's water displacement method, the measurement is accurate.
3. It can directly read the weight, density and volume data of various forms of samples (solid, particle, film, float, powder).
4. Weighing range 0.001~ 220g, density accuracy of 0.0001g/cm ³, Measurement accuracy is high.
Principle
XFMD-2201B Touch Screen Solid Density Meter uses Archimedes' water displacement method for measurement. By measuring the weight of the sample in air and the weight in water, the volume of the sample is calculated according to the buoyancy principle, and then the density value is obtained.
Applications
Rubber, Plastic, Wire and cable, Oil bearing, Composites, Cosmetics, Shoe Material, Glass, Precious Metal Hardware Recycling, Powder Metallurgy Material, Magnetic Material
Standards
GB/T533、ISO2781、ASTMD297-93、DIN 53479、ASTMD792、D618、D891、ISO1183、GB/T1033、ASTM D792-00、JISK6530
Steps
1. Place the sample on a measurement table, weigh it in air, and record the average weight.
2. Immerse the sample in water and weigh its average weight in the water.
3. The instrument automatically calculates and directly reads the density value and volume of the sample according to the measured data.
Notice
• Please ensure that the instrument is used in a smooth, vibration-free environment.
• Before measurement, make sure that the surface of the sample is clean, drying and free of attached bubbles.
• Measurement mode based on sample characteristics (e.g. solid, particle, float, etc.)
• Regularly calibrate the instrument to ensure Measurement accuracy.
• Please follow the instructions in the product manual when operating to avoid improper use.
• This product is a precision instrument, please keep it properly to avoid impact or drop.
