Overview
LC-DMS-ProNI Digital Magnetic Stirrer is a laboratory instrument for liquid mixing, mainly used for stirring or simultaneous heating of liquids or solid-liquid mixtures with low viscosity consistency. It uses a magnetic field to push the stirrer placed in the container to rotate in a circle, so as to achieve the purpose of stirring the liquid. With the heating temperature Control system, the temperature of the sample can be heated and controlled according to the specific experimental requirements to maintain the temperature conditions required by the experimental conditions.
Features
1. The new Stirrer features the latest mixing technology and is suitable for unmanned operation.
2. The agitator that can be automatically identified escapes and is automatically recaptured.
3. Nano ceramic disc, disc, square disc, size optional.
4. Backlit LCD LCD display for easy reading.
5. Adopt fuzzy logic control and microprocessing foundation to ensure control accuracy.
6. Multiple operation modes ensure that the mixing function does not change due to external factors.
7. With safe temperature control, it can achieve unmanned operation.
8. External PT100 temperature sensor can be used.
9. After the experiment, the thermal warning screen shows the residual temperature of the heating plate.
10. Connect to PC via RS232 interface.
11. With two independent safety circuits, independent temperature sensor detection, hearth temperature can be set.
Principle
The basic principle of Magnetic Stirrer is to use the principle of same-sex repulsion and opposite-sex attraction of the magnetic field to push the magnetic stirrer placed in the container to operate in a circle, so as to achieve the purpose of stirring the liquid.
Applications
Laboratory liquid mixing, solid-liquid mixture stirring
Steps
1. Put the magnetic stirrer into the container to be stirred.
2. Place the container in the center of the work plate.
3. Turn on the power and set the required Rotation speed through the control panel.
4. (if applicable) Set the heating temperature.
5. Start the equipment and start stirring.
6. After the experiment, the device will display the residual temperature warning of the heating plate.
Notice
• Please ensure that the Ambient Temperature is used at 5-40 ° C and the relative humidity is ≤ 80%.
• Max. Capacity of stirring is 20L, please do not overdose.
• The maximum length of the stirrer is 30mm, please use the appropriate size stirrer.
• Pay attention to the safe Temperature range of the working plate.
• After the experiment, please pay attention to the residual temperature of the heating plate displayed on the thermal warning screen to avoid burns.
• Equipment has IP 42 Protection Rating, but still need to pay attention to the Operating Environment to avoid large splashes of liquids.
