Overview
JJ-1 60W powerbasic stirrer is a precision booster electric stirrer with stainless steel stirringrod, which has excellent corrosion resistance. The product is easy to operate, smooth operation, supports stepless speed regulation, and its super powerful motor can carry out precise and stable stirring of high viscosity liquid solutions in a wide range of speeds. Rotation speed is digitally displayed, accurate and intuitive. It is especially suitable for stirring large-volume samples. It is a required tool in petroleum, chemical industry, metallurgy, Spinning & weaving, food, environmental protection, biochemical laboratories, analysis laboratories and education and scientific research fields.
Features
1. Adopt a permanent magnet DC motor, equipped with a booster speed control circuit, with a booster function.
2. Small noise, Rotation speed is stable, and the speed is continuously adjustable.
3. Equipped with mechanical timing function.
4. Can be equipped with a control box to achieve operation away from the workbench.
Principle
The powerbasic stirrer is powered by a permanent magnet DC motor and combined with a booster speed control circuit to achieve continuous and smooth control of the stirring speed. The user can set the desired Rotation speed through the speed control knob and read it intuitively through the digital display screen. The mechanical timer can automatically control the start and stop of the stirring operation within the set time range.
Applications
Petroleum, chemical industry, metallurgy, Spinning & weaving, food, environmental protection, biochemical laboratory, analysis room, education and research
Steps
1. Place the Stirrer on a stable bench.
2. Select the appropriate stirringrod according to the sample and install it.
3. Connect the AC220V 50Hz power supply.
4. If timing is required, set the required stirring time (0-9999 minutes) by mechanical timer.
5. swirl/spin knob, start from low speed and gradually adjust to the desired Rotation speed (0-3000 rpm).
6. Observe the digital display and confirm the Rotation speed.
7. After stirring, turn off the power after adjusting the Rotation speed to the lowest level, remove the stirringrod and clean it.
Notice
• Power supply voltage is AC220V and Frequency is 50Hz.
Start at a low speed to avoid sudden high-speed start.
• Do not touch the swirling/spinning stirringrod during stirring.
• Clean the stirringrod immediately after use.
• When not in use for a long time, please disconnect the power supply.
