Overview
DF-101S (standard) collector Magnetic Stirrer adopts collector heating method, the heating container is in strong heat radiation, and the heating speed is fast. The collector pot is made of stainless steel stamping, combined with special heating pipe and high temperature sealing, and supports various Heating modes such as water bath, oil bath and dry burning.
Features
1. Using heat collection heating method, the heating speed is fast, the temperature is uniform and the efficiency is high.
2. The main components are well-selected, using DC high-power motors, with large stirring force and low noise.
3. Magnets use "NdFeB" permanent magnets with stronger magnetic force as rotors to ensure sufficient suction and torque.
4. The pot body is made of good stainless steel stamping and is combined with special heating pipe sealing.
5. It can be used for water bath, oil bath and dry burning, with a variety of functional options.
6. The heating part and the electrical box are isolated by heat dissipation plate, and the high temperature does not affect the electrical performance of the whole machine.
Principle
The device generates strong heat radiation through the heat collection heating method, so that the container placed on it is heated evenly and quickly. At the same time, through the built-in magnetic drive system, the magnetic stirrer in the container is driven to swirl/spin to realize the stirring and mixing of the solution.
Applications
Chemical synthesis, sample preparation, solution mixing, thermostatic reaction, materials research
Steps
1. Place the device on a stable bench and connect it to the power supply.
2. According to the experimental requirements, add water (water bath) or oil (oil bath) to the collector, or perform a dry burning operation.
3. Place the container with the sample and magnetic stirrer on the work plate.
4. Turn on the power switch.
5. Set the required stirring Rotation speed (0-2600rpm) and heating temperature (room temperature -400 ° C) through the control panel.
6. Start stirring and heating. After the experiment, turn off the power supply and clean up after the equipment is chilled down.
Notice
• Please ensure that the equipment is placed on a smooth and well-ventilated work table for use.
• Before connecting the power supply, please confirm that the Operating voltage is 220V 50Hz.
• When taking a water or oil bath, pay attention to the amount of liquid to avoid spillage.
• When dry burning, do not burn for a long time and pay attention to high temperature burns.
• When the equipment is working, the heating part is very hot, do not touch it.
• Please clean the hot pan and work plate in time after use.
• Do not place items unrelated to the experiment on the device.
