Overview
The DF-101T-5 collector Magnetic Stirrer adopts the collector heating method, so that the heating container is in a strong heat radiation, and the heating speed is three times that of other similar plane Stirrers. The collector pot is made of good stainless steel stamping, combined with special heating pipe and high temperature sealing, which can be used for water bath, oil bath and dry burning.
Features
1. Using heat collection heating method, the heating speed is fast, the temperature is uniform and the efficiency is high.
2. Excellent selection of main components, DC high-power motor, large stirring force, low noise.
3. Magnets use "NdFeB" permanent magnets with stronger magnetic force as rotors to ensure sufficient suction and torque.
4. The pot body is made of good stainless steel stamping and is combined with special heating pipe sealing.
5. It can be used for water bath, oil bath and dry burning, with a variety of functional options.
6. The heating part and the electrical box are isolated by heat dissipation plate, and the high temperature does not affect the electrical performance of the whole machine.
Principle
The equipment generates strong heat radiation through the heat collection heating method to efficiently and uniformly heat the container placed in the heat collection pot. At the same time, through the built-in magnetic stirring system, the "NdFeB" permanent magnet rotor drives the stirrer swirl/spin in the container to achieve liquid stirring and mixing.
Applications
Chemical synthesis, biopharmaceuticals, materials science, food testing, teaching experiments
Steps
1. Place the device on a stable bench and connect it to the power supply.
2. According to the experimental requirements, add water (water bath) or oil (oil bath) to the collector, or perform a dry burning operation.
3. Place the container containing the sample into the heat collector.
4. Put the appropriate stirrer into the liquid in the container.
5. Turn on the power switch and set the required stirring Rotation speed and heating temperature through the control panel.
6. The equipment starts to work, heating and stirring.
7. After the experiment, turn off the heating and stirring functions. After the equipment is cooled down, turn off the power supply and take out the container and stirrer.
Notice
• Please place the equipment on a smooth, well-ventilated work table for use.
• Before connecting the power supply, please confirm that the Operating voltage is consistent with the equipment requirements (220V 50Hz).
• When taking a water or oil bath, pay attention to the amount of liquid and avoid dry burning (unless the dry burning function is explicitly selected) or overflow.
• During the heating and stirring process, do not directly touch the hot pot, heating container or stirrer with your hands to prevent burns.
• When the equipment is working, the heating part temperature is very high, please ensure that there are no flammable and explosive items around it.
• Do not operate above Max. stirring Capacity (5000mL).
• After use, please clean the hot pot and work area in time.
• If not used for a long time, please disconnect the power supply and store the equipment in a drying place.