Overview
LC-JSY-3 thermostatic metal bath is a microcomputer-controlled product of LICHEN brand, which can be widely used in sample preservation and reaction, DNA amplification and predenaturation of Electrophoresis, serum coagulation and other scenarios.
Features
1. Temperature and time LCD display.
2. Display the set temperature and instant temperature simultaneously.
3. The temperature control time can be set.
4. Programmable multi-point temperature time setting (up to 5 points).
5. Metal modules are used to protect samples from contamination.
6. Metal modules can be easily replaced for easy cleaning and disinfection.
7. Adjustment of temperature deviation.
8. The buzzer alarm prompt after the temperature control time is over.
Principle
Control system drives the heating membrane to heat the metal module to achieve precise temperature control. At the same time, the device provides horizontal rotary oscillation function to promote sample mixing or reaction.
Applications
Sample preservation and reaction, DNA amplification and predenaturation of Electrophoresis, serum coagulation
Steps
1. Connect the power supply.
2. Set the required temperature, Oscillation Frequency (200~ 1800rpm) and Timing Time (1min~ 99h59min) through the control panel.
3. Multi-point temperature time programming settings can be performed.
4. Place the sample and start the device.
5. After the operation is completed, the device beeps an alarm prompt.
Notice
• Power supply voltage matches equipment requirements before use.
• Do not touch the high-temperature metal module when the device is running to avoid burns.
• Before cleaning or disinfecting, make sure the equipment is powered off and chilled down.
• When replacing the module, please handle it with care to avoid damaging the interface.
• The built-in fuse specification of the device is 250V 3A to 5 × 20, please do not use mismatched accessories.
• Please use the equipment on a smooth, well-ventilated countertop.
