Overview
LC-JSY-2GW high temperature thermostatic metal bath is a new product controlled by microcomputer, which can be widely used in sample preservation and reaction, DNA amplification and predenaturation of Electrophoresis, serum coagulation, etc. The product Temperature range is 0~ 150 ℃ or -10~ 100 ℃, with High Accuracy Temperature Control and Time Setting Functions.
Features
1. Temperature and time LCD display.
2. Display the set temperature and instant temperature simultaneously.
3. The temperature control time can be set.
4. Programmable multi-point temperature time setting.
5. Metal modules are used to protect samples from contamination.
6. Metal modules can be easily replaced for easy cleaning and disinfection.
7. Temperature deviation calibrated.
8. The buzzer alarm prompt after the temperature control time is over.
Principle
The microcomputer Control system is used to heat metal modules through stainless steel heating tubes or semiconductor heating elements for precise temperature control. Users can set the target temperature and control time, and the system monitors and calibrates the module temperature in real time to ensure that the sample is reacted or stored in a thermostatic environment.
Applications
Sample preservation and reaction, DNA amplification and predenaturation of Electrophoresis, serum coagulation
Steps
1. Connect the power supply.
2. Set the required temperature and time program through the control panel.
3. Place the sample on the metal module.
4. Start the device and start the thermostatic process.
5. After the run, the device beeps to prompt to take out the sample.
Notice
• Power supply voltage meets equipment requirements before use.
• Do not touch the high-temperature metal module while the device is running to prevent burns.
• When replacing or cleaning metal modules, make sure the equipment is powered off and chilled down.
• Do not use beyond the temperature and time range specified by the equipment.
Equipment should be placed in a smooth, well-ventilated environment.
