Overview
LICHEN CLT-1A250ml Electric Mantle is a laboratory heating equipment with magnetic stirring function, which is mainly used for laboratory liquid heating in colleges and universities, petroleum, chemical industry, environmental protection and other industries. It uses high temperature resistant and alkali-free fiberglass as insulating material, seals the resistance wire in the insulating layer, and then weaves into a hemispherical internal heating device, which is a satisfactory heating equipment for laboratories and fine chemical units.
Features
1. Large heating area.
2. Using hemispherical internal heating device, not easy to scratch Glass ware.
3. Fast heating, good thermal insulation effect, no open flame.
4. With magnetic stirring function, the stirring speed can be adjusted from 0 to 2000rpm.
5. Temperature control mode, accurate temperature control.
Principle
The Electric Mantle uses high temperature resistant and alkali-free fiberglass as an insulating material, and the resistance wire is sealed in the insulating layer to form a heating element. After power on, the resistance wire heats up, and the heat is evenly transferred through the insulating layer to form a hemispherical heating area to heat the container. At the same time, the built-in Magnetic Stirrer drives the stirrer in the container through the swirl/spin magnetic field to realize the stirring and mixing of the liquid.
Applications
Colleges and universities, laboratories in petroleum, chemical, environmental protection and other industries
Steps
1. Place the Electric Mantle on a smooth countertop.
2. Place the appropriate Glass container with the liquid in the Electric Mantle.
3. Put a suitable magnetic stirrer in the container.
4. Turn on the power supply.
5. Set the required heating temperature and stirring speed through the control panel.
6. Start the equipment and start heating and stirring.
7. After use, turn off the power and take out the container after the equipment is chilled down.
Notice
• Make sure the equipment is placed on a smooth, ventilated countertop for use.
• Use Glass containers that match the capacity of the Electric Mantle to avoid containers that are too large or too small.
• The maximum surface temperature of the heating element is 300 ° C. Please pay attention to high temperature during operation to avoid burns.
• Do not directly touch the inside of the heating sleeve or the high temperature container when the equipment is working.
• After use, the power should be turned off and the equipment should be completely cooled down before cleaning or storing.
• When cleaning, please disconnect the power supply and wipe it with a soft cloth to avoid liquids entering the device.
• Do not load or dry burn.
• The magnetic stirring function needs to be used with a suitable stirrer.
