Overview
This instrument is a small drying equipment with 12 holes that uses hot air flow to quickly dry Glass utensils. It is suitable for laboratories in Universities & colleges, chemical industry, Food processing and other fields, and is used for rapid drying of Glass utensils such as testtubes and beakers.
Features
1. The drying operation is fast, energy-saving and safe.
2. The product is equipped with a temperature setting knob, which can dry Glasses at a relatively constant temperature, and can limit the maximum temperature to ensure the safe use of the equipment.
3. Novel design, easy to use. Appearance, small size, light weight, easy to move, placed on the table to observe the operation is very convenient.
Principle
The air dryer generates hot air flow through the built-in heating device, and drives the air flow from the trend blowing through the motor, and uses the hot air to quickly remove the moisture on the surface of the Glass ware, thereby realizing rapid drying.
Applications
Universities & colleges laboratories, Chemical laboratories, Food processing laboratories
Standards
Operating voltage~ 220V +/- 10% 50Hz
Steps
1. Place the equipment on a stable workbench.
2. Glass utensils (such as testtubes and beakers) to be dried are inserted into the corresponding air duct to trend.
3. Turn on the power supply.
4. Swirl/spin temperature setting knob to set the desired drying temperature (range 40-120 ° C).
5. The equipment starts to work, and the hot air flow dries the utensils, and the drying time is about 8-10 minutes.
6. After drying, turn off the power and take out the utensils.
Notice
• Operating voltage meets equipment requirements (~ 220V +/- 10% 50Hz) before use.
Do not exceed the set maximum temperature limit to ensure safety.
• Do not cover the trend or block the air duct when the equipment is working.
• Use caution when moving devices.
• Be sure to disconnect the power supply before cleaning and maintenance.
