Overview
LICHEN 30-hole airflow dryer is a small drying equipment that uses hot air flow to quickly dry Glass utensils. It is suitable for laboratories in Universities & colleges, chemical industry, Food processing and other fields for rapid drying of Glass utensils such as testtubes and beakers.
Features
1. The drying operation is fast, energy-saving and safe.
2. The product is equipped with a temperature setting knob, which can dry Glasses at a relatively constant temperature, and can limit the maximum temperature to ensure the safe use of the equipment.
3. Novel design, easy to use. Appearance, small size, light weight, easy to move, placed on the table to observe the operation is very convenient.
Principle
The instrument generates hot air flow through the built-in heating device, and blows out the air flow from multiple outlet trends through the motor, and uses the hot air to quickly remove the moisture on the surface of the Glass ware, so as to achieve rapid drying.
Applications
Universities & colleges laboratories, chemical laboratories, Food processing laboratories
Steps
1. Place the device on a stable bench and connect the power supply.
2. Glass utensils (such as testtubes and beakers) that need to be dried are inserted upside down into the corresponding air duct to trend.
3. Swirl/spin temperature setting knob to set the desired drying temperature (range 40-120 ° C).
4. Turn on the equipment and start the drying operation.
5. After waiting for 8-10 minutes, turn off the equipment and remove the dried utensils.
Notice
• Operating voltage is~ 220V +/- 10% 50Hz and safely grounded.
• Before use, please confirm that the temperature is set within the required range to avoid damage to the utensils or equipment due to excessive temperature.
• Do not override the trend when the equipment is working, and keep the surroundings well ventilated.
Be sure to turn off the power before moving the device and wait for it to chill down.
• Do not use the device for drying non-Glass ware or beyond its intended purpose.
• Please disconnect the power supply before cleaning the equipment.
