Overview
The UPA-L series of ultra-pure water machines is specially designed for High Accuracy experiments with extreme requirements for ultra-pure water. This series of products has been carefully controlled from design, process to component procurement and production commissioning, aiming to become a high-quality ultra-pure water machine comparable to imported products. The UPA-L 60L/h model is a Floor-Standing model with a water production capacity of 60 liters/hour.
Features
1. Adopt 5.1-inch large-screen LCD Chinese display, which can display the running status of the device in real time.
2. With RO membrane water production and UP ultrapure water dual-channel water quality and temperature online display function, easy to monitor.
3. Adopt double pump operation to support regular automatic circulation to maintain water quality stability at all times.
4. Provide Chinese and English language selection function to adapt to different users' language usage habits.
5. The service life of consumables such as pretreatment, RO film, UV lamp and ultrapure water bag can be arbitrarily set.
6. It can display the use and remaining time of consumables.
7. It can automatically start and close the circulation system, which helps to extend the service life of the ultrapure water bag.
8. Automatic reminder of expiration of consumables to avoid water quality degradation due to failure of consumables.
9. System settings are password protected to prevent unauthorized data changes.
10. Full plastic shell, with non-rusting characteristics.
11. UPA-L is a Floor-Standing ultra-pure water machine.
Principle
The ultra-pure water machine adopts a combination of reverse osmosis (RO) (RO) and ultra-purification (UP). First, the raw water is pretreated and RO membranes are preliminarily purified to produce pure water with low resistivity; then the pure water passes through deep purification units such as ultra-pure water packs to further remove impurities such as ions, and finally produces ultra-pure water with a resistivity of up to 17-18.2 MΩ .cm@25 ° C. The equipment adopts double pump operation and has an automatic circulation function to maintain the stability of ultra-pure water quality.
Applications
High Accuracy Experiments for Ultrapure Water
Standards
The data did not mention specific compliance criteria.
Steps
The information does not provide detailed operation steps.
Notice
• The water inlet conditions must be urban tap water or groundwater, and the TDS value must be ≤ 200PPM.
• The pH value range of the influent should be between 4-9.
• The inlet water temperature should be maintained between 15 and 35 degrees Celsius.
• Applicable water pressure is 0.15MPa (pressure under minimum feed water Flow rate of 0.3m ³/hr).
• The input power supply is 220V/50HZ.
• Pay attention to the expiration reminder of consumables and replace them in time to ensure water quality.
• System settings are password protected, please keep the password properly.
