Overview
101-00S electric air blowing dryer adopts the air in the working room after electric heating, forced swirl/spin circulation through the fan, and uniform heat exchange with the heating object in the working area to achieve the purpose of thermostatic fostering or drying. It has the characteristics of novel shape, excellent process, accurate temperature control, stable performance, easy maintenance and convenient operation.
Features
1. PID temperature control technology, LED digital tube display setting temperature and current temperature, clear and intuitive.
2, with timing, over-temperature alarm, temperature deviation trimming, temperature control self-tuning and other functions.
3, left electric heating tube heating, no heat source at the bottom, accurate temperature control.
4, independent fan switch, the fan is resistant to high temperature and corrosion, and can work continuously for a long time.
5. The studio is made of stainless steel (B series) or galvanized sheet, with a four-corner arc design. Shelf can be freely loaded and unloaded, making it easy to clean.
6. Using double-decked thickened Glass large windows, the situation in the workplace is clear at a glance.
7, cold rolled steel shell, using electrostatic spray treatment process, corrosion resistance, aging resistance.
Principle
The drying oven heats the air in the working room through an electric heating element, and then uses a fan to force the hot air to perform a swirl/spin cycle. This cycle mode allows the hot air to continuously and evenly exchange heat with the heated objects in the working area, so as to achieve the purpose of thermostatic fostering or drying.
Applications
Thermostatic foster drying
Steps
1. Turn on the power supply (AC220V 50HZ).
2. Turn on the independent fan switch.
3. Set the required temperature (RT + 5~ 250 ° C) and timing time (0~ 999min) through the LED digital tube.
4, the equipment starts to work, the PID temperature control system automatically adjusts, reaching the thermostatic state.
5. After the work is completed, turn off the power of the device.
Notice
• Power supply voltage is AC220V 50HZ.
• The maximum load of a single shelf is 15kg, do not overload.
• When the equipment is working, do not block or cover the ventilating port.
• When cleaning the studio, remove the shelf for cleaning.
• Note that the temperature control accuracy of the equipment is +/- 1 ° C, and the Temperature Uniformity is +/- 2%.
• In case of over-temperature alarm during use, please check the setting parameters or equipment status.
