Overview
The SPX-600BE biochemistry cultivating box is a special thermostatic device controlled by a microcomputer. It has a liquid crystal display and a light touch button, which is easy to operate; the studio is made of stainless steel, with a four-corner arc design, and the shelf can be freely loaded and unloaded for easy cleaning; the shell of the box is treated with electrostatic spray, which is beautiful and durable. This product is suitable for scientific research, experiments and production departments in the fields of environment protection, livestock, drug inspection, aquatic products, etc. It is mainly used for water analysis, BOD determination, bacterial mold microbial foster preservation, plant cultivation and breeding tests.
Features
1. Adopting PID temperature control technology, the LCD screen clearly displays the set temperature and current temperature.
2. With safety functions such as timing, temperature limit alarm, over-temperature self-limit, and automatic power failure.
3. Using high efficiency Compressor and circulating fan, high efficiency, energy saving and low consumption.
4. Stainless steel studio, four corners arc design, shelf can be freely loaded and unloaded, easy to clean.
5. The inner door is tempered Glass, which is easy to observe and has good sealing performance to prevent temperature loss.
6. The outer door is sealed with magnetic tape, which is convenient to open and close and has good sealing performance.
7. Cold-rolled steel shell by electrostatic spray treatment, corrosion resistance, aging resistance.
Principle
The biochemistry cultivating box uses the PID algorithm to precisely adjust the temperature through the microcomputer Control system. The system drives the Compressor cooling and heating elements to heat, and cooperates with the circulating fan to force the air in the working room to circulate to ensure uniform and stable temperature. When the temperature reaches the set value or abnormal conditions such as overtemperature occur, the Control system will activate protection functions such as alarm or automatic power failure.
Applications
Experimental and production departments of scientific research institutions such as environment protection, livestock, drug inspection, and aquatic products
Steps
Place the equipment in a stable and well-ventilated environment to ensure that the Ambient Temperature meets the requirements (when the set temperature is < 10 ° C, the Ambient Temperature should be < 26 ° C).
Connect the AC 220V 50Hz power supply.
3. Set the required temperature, time and other parameters by tapping the button and LCD screen.
4. Place the sample to be fostered on the shelf in the studio.
5. Close the door and ensure that the magnetic strip is well sealed.
6. Start the device and start running.
7. The internal situation can be observed through the tempered Glass inner door during operation.
8. After running or reaching the scheduled time, take out the sample and clean the studio.
Notice
Equipment should be placed in a stable, well-ventilated position.
• Pay attention to the Ambient Temperature Requirements: When the set temperature is lower than 10 ° C, the Ambient Temperature should be lower than 26 ° C.
• Please use the specified AC 220V 50Hz power supply.
• When placing samples, please note that the load-bearing capacity of a single shelf does not exceed 15KG.
• When cleaning the studio, please load and unload the shelves and pay attention to safety.
• In case of abnormal situations such as alarms during operation, please deal with them in time or contact a professional.
• Net weight of the equipment 180kg, pay attention to safety when moving.
