Overview
Constant Temperature and Humidity Chamber HSP-250BE adopts microcomputer control, liquid crystal display, light touch operation button, easy to operate. Using stainless steel studio, the four corners are semi-circular arc, and the shelf can be freely disassembled, which is convenient for studio cleaning. The box shell is treated by electrostatic spraying process, which is beautiful and generous in shape, anti-corrosion and long in service life.
Features
1. PID temperature control technology, LCD LCD display to set temperature and humidity, current temperature and humidity, clear and intuitive.
2. With a limited temperature alarm system, over-temperature self-limiting, automatic power-off and timing functions.
3. The internal humidification function ensures the temperature and humidity requirements of the experiment.
4. Using Compressor and circulating fan, high efficiency, low consumption and energy saving.
5. The studio is made of stainless steel plate, with a four-corner arc design. Shelf can be freely loaded and unloaded, making it easy to clean.
6. The inner door is made of tempered Glass, which is visual and has good sealing performance to prevent temperature loss.
7. The outer door is sealed with magnetic tape, which is convenient to open and close and has good sealing performance.
8. Cold rolled steel shell, using electrostatic spray treatment process, corrosion resistance, aging resistance.
Principle
The equipment uses a microcomputer control system, combined with PID temperature control technology and internal humidification system, to precisely control the temperature and humidity in the box. The Compressor and circulating fan are used to achieve efficient temperature regulation and air circulation to ensure uniform and stable temperature and humidity inside the studio.
Applications
Environmental protection, institutions, livestock, drug inspection, aquatic research institutions and other experimental and production departments, water analysis, BOD determination, bacterial foster, mold foster, microbial foster and preservation, plant cultivation, breeding experiments
Steps
Connect the AC220V 50Hz power supply.
2. Set the required temperature, humidity, and timing parameters by tapping buttons and the LCD display.
3. Put the sample in the studio and make rational use of the removable shelves.
4. Close the inner door (Tempered Glass) and the outer door (magnetic sealing) to ensure sealing.
5. Start the device, and the device will automatically run to the set conditions and hold.
6. After the experiment, shut down the equipment according to the program, remove the sample, and clean it.
Notice
• Make sure to use an AC220V 50Hz power supply.
• When placing samples, please note that the load-bearing capacity of a single Shelf does not exceed 15Kg.
The equipment has an over-temperature protection function, but it is still necessary to avoid long-term over-limit operation.
• When cleaning the studio, removable shelves for cleaning, pay attention to the use of appropriate detergents.
• Regularly check the sealing of the door seal (magnetic strip and tempered Glass door) to ensure the thermal insulation effect.
• Net weight of the equipment is large (113Kg), so pay attention to safety when moving or installing.
• Do not use outside the specified Humidity range (temperature 5-50 ° C, humidity 50-90% RH).
