Overview
The GREELOY GA-S301 oil-free scroll Air Compressor is a 2.2KW clean air source device with direct motor drive. When the exhaust pressure is 8 Bar, the exhaust volume is stable at 240L/min, and it has the characteristics of low noise (72dB), high reliability and low maintenance cost. It is suitable for a variety of fields that require pure compressed air.
Features
1. Stable exhaust volume: During the 0-8Bar pressure change process, the exhaust volume remains stable, and the marked flow is the actual flow at 8Bar.
2. High reliability: simple structure, few parts, no metal contact except bearings during operation, and small vibration.
3. Ultra-quiet: No valve knock and airflow Impact, continuous suction and exhaust, the lowest noise can be 60dB.
4. Low failure rate: high volumetric efficiency, small leakage, no suction and exhaust valve resistance loss, high mechanical efficiency.
5. Low maintenance cost: the main engine has few wearing parts, almost maintenance-free, and no gearbox eliminates oil consumption.
6. 100% oil-free: The entire gas system is free of oil and carbon pollution, providing clean gas.
7. High efficiency and energy saving: using three-phase 380V AC motor, good starting performance and high motor efficiency.
Principle
The product adopts oil-free scroll air compression technology. The air compression module is integrated with the motor to form a continuous and stable compression chamber through the relative movement of the scroll plate to realize the suction, compression and discharge of air. There is no metal contact except the bearing in the process, which reduces friction loss and ensures efficient and smooth operation.
Applications
Industrial manufacturing, experimental analysis, biotechnology, measuring instruments, water treatment, environment monitoring, automation, science and technology communication, Petrochemicals, environmental protection energy, aerospace technology, automotive braking, printing
Steps
1. Check the device connection and power supply (three-phase 380V).
2. Confirm that the air outlet (G 1/2) pipeline is connected correctly.
3. Set the start and stop pressure (usually 5-8 bars).
4. Start the device and observe whether it is running smoothly.
5. The equipment will automatically start and stop according to the set pressure to provide a stable air source.
Notice
• Make sure to use a three-phase 380V AC power supply.
Equipment should be placed in a smooth, well-ventilated environment.
• Regularly check the running status of the equipment and the connecting pipes.
• Pay attention to the exhaust pressure range (5-8 Bar) marked on the equipment, and do not use it under overpressure.
Despite low maintenance requirements, basic inspections are recommended to ensure long-term reliability.
