Please contact customer service
Driven by a brushless DC motor, Max. Torque reaches 2148.5N.cm and can handle media with a viscosity of up to 100000mPa.s. With Touchscreen control, LCD real-time Rotation speed display, automatic constant speed compensation and overload protection, it supports long-term continuous operation.
Category : Laboratory Mixer
Brand : AN
SKU : NB022912
Service :The delivery and service By NBCLab.Com
The ANGNI AM1000 laboratory electric Stirrer is an electronic constant-speed stirring equipment driven by a brushless DC motor, suitable for stirring and mixing low to medium and high viscosity liquids in the laboratory. The machine is compact, low-noise, maintenance-free, and the Rotation speed is controlled by a microprocessor. It can effectively compensate for load and voltage fluctuations, ensure constant speed and reliable operation, and has built-in overload protection to support long-term high-load continuous operation.
1. Driven by brushless DC motor, compact structure, ultra-low noise, maintenance-free. 2. Rotation speed controlled by the microprocessor can compensate for load changes and Power supply voltage fluctuations in time, and the constant speed is reliable. 3. Built-in automatic overload protection device to ensure the safety of long-term high-load continuous operation. 4. Knob running state control, easy to operate, Rotation speed stepless adjustment. 5. Digital display settings and actual output Rotation speed ensure intuitive collection of experimental data. 6. Equipped with running timing control function to ensure that the experimental time is effectively controllable. 7. Rotation speed of stable stirring, competent for stirring of high viscosity medium and Stock. 8. Equipped with a quick-acting chuck, the clamping range is 3~ 16mm, which is convenient for Impeller installation. 9. Support Rotation speed dynamic detection, trend Linear dispersion display, temperature dynamic detection and Rotation speed memory function.
The Stirrer is powered by a brushless DC motor that drives the Impeller swirl/spin. Its core control part uses a microprocessor to monitor the motor load and Power supply voltage in real time, and dynamically adjust the motor output through algorithms to compensate for the fluctuations in Rotation speed caused by these factors, so as to achieve accurate constant speed stirring. The built-in overload protection circuit automatically cuts off the power supply when the current is abnormal, ensuring the safety of the equipment.
Laboratory Liquid Mixing, High Viscosity Media Processing, Stock Preparative
Protection Rating IP 40
1. Place the device on a stable countertop and connect it to an AC 220V power supply. 2. According to the mixing requirements, select and install a suitable Impeller (such as a dissolved Impeller), which is fixed by a quick rotary chuck (clamping range 3~ 16mm). 3. Place the material to be stirred in a suitable container. 4. Set the required stirring Rotation speed (range 50~ 2000rpm) and running time (Timer Range 1~ 6000min) through Touchscreen. 5. After confirming that the settings are correct, start the device and start stirring. 6. During operation, parameters such as real-time Rotation speed and temperature trend Linear dispersion can be observed through Touchscreen. 7. After the mixing is complete, the device will automatically stop or manually shut down, remove the Impeller and clean it.
• Power supply voltage is AC 220V, Frequency 50/60Hz. • Equipment Ambient Temperature should be ≤ 40 ℃, relative humidity ≤ 80%. • Do not exceed the maximum Processing capacity (200L) and maximum viscosity (100000mPa.s) of the equipment calibration. • Impeller installation must be firm to ensure that it is within the clamping range of the rotary chuck (3~ 16mm). • When the equipment is running, do not put your hands or foreign objects into the mixing area. • If the device triggers overload protection, check if the load is too large, troubleshoot and restart. • Regularly check whether all parts of the equipment are in good condition and keep them clean.
[A] No, it isn't. This is the ex-factory price of the product in the Chinese Mainland. In addition to this price, buyers from different countries need to account for additional costs such as shipping fees, tariffs, and others. For specific regional quotes, please consult our customer service or fill out a quotation form.
[A] First, please click on the quotation form on the website and fill in detailed information. Our customer service personnel will then send you a quotation based on your specific country and region, confirming payment and delivery methods. Following this, we proceed with contract signing, payment, and shipment. You can then await delivery.
[A] After-sales repair for overseas instruments is an unavoidable issue. Our repair terms stipulate that the sender is responsible for the shipping and insurance costs incurred for the repair. Repairs within the warranty period are free, while repair costs beyond the warranty period are determined based on the actual situation.
