Overview
The ANGNI AM110W-O Laboratory Electric Stirrer is an electronic constant-speed stirring device driven by a brushless DC motor, suitable for stirring and mixing of low to high viscosity liquids in the laboratory. The machine is compact, low-noise, maintenance-free, and controlled by a microprocessor Rotation speed can effectively compensate for load and voltage fluctuations, ensure constant speed and reliable operation, and has built-in overload protection to support long-term high-load continuous experiments.
Features
1. Driven by brushless DC motor, compact structure, ultra-low noise, maintenance-free.
2. Rotation speed controlled by the microprocessor can compensate for load changes and Power supply voltage fluctuations in time to ensure constant speed and reliability.
3. Built-in automatic overload protection device to ensure the safety of long-term high-load continuous operation.
4. Knob control running state, easy to operate, support stepless speed regulation, can be corrected at any time Rotation speed.
5. Digital display settings and actual output Rotation speed ensure intuitive collection of experimental data.
6. Equipped with running timing control function (1 to 6000 minutes) to ensure that the experimental time is controllable.
7. Rotation speed, capable of mixing high viscosity media and Stock task.
Principle
Stirring and mixing is the process of combining materials from different sources under the action of external energy. The Stirrer drives the Impeller through a motor to make circular motion, providing shearing and circulation energy for the liquid to achieve homogenization of compatible liquids, dissolving and mixing of solid particles, and equilibrating temperature or concentration differences, accelerating dissolving and chemical reactions.
Applications
Schools, universities, biotechnology, chemical, food, and other industries
Standards
Protection Rating: IP40
Steps
1. According to the experimental requirements, select and install a suitable Impeller (clamping range φ 2~ 10mm).
2. Connect the device to power (AC100~ 240V, 50/60Hz).
3. Set the required stirring Rotation speed through the knob (30~ 2000rpm stepless adjustable).
4. If necessary, set the running time (1 to 6000 minutes).
5. Start the device and monitor the actual Rotation speed through the digital display.
6. After the experiment, turn off the power, remove and clean the Impeller.
Notice
* Power supply voltage in the range of AC100~ 240V.
* Impeller clamping range must not exceed φ 2~ 10mm.
* Equipment Ambient Temperature should be ≤ 40 ℃, relative humidity should be ≤ 80%.
Processing capacity is up to 20L, medium viscosity range is 0~ 20000mPa · s.
Please pay attention to the overload protection function when using it, but avoid extreme overload operation for a long time.
* Do not allow liquids to enter the inside of the device, its Protection Rating is IP40.
Regularly check equipment fixtures and connected components to ensure safe operation.
