Overview
The ANGNI AM110W-T Laboratory Electric Stirrer is an electronic constant-speed stirring device driven by a brushless DC motor, suitable for stirring and mixing low to high viscosity liquids in the laboratory. The machine is compact, ultra-low noise and maintenance-free. The Rotation speed is controlled by a microprocessor, which can effectively compensate for load and voltage fluctuations, ensure constant speed reliability, and has built-in overload protection to support long-term high-load continuous safe operation.
Features
1. Driven by brushless DC motor, compact structure, ultra-low noise operation, maintenance-free.
2. Rotation speed controlled by the microprocessor can compensate for load changes and Power supply voltage fluctuations in time to ensure constant speed and reliability.
3. Built-in automatic overload protection device to ensure the safety of long-term high-load continuous operation.
4. Knob control running state, easy to operate, support stepless speed regulation, can be corrected at any time Rotation speed.
5. The digital display sets the Rotation speed and the actual output Rotation speed to ensure the intuitive collection of experimental data.
6. Equipped with a running timing control function (1 to 6000 minutes) to ensure that the experimental time is effectively controllable.
7. Rotation speed, capable of mixing high viscosity medium and Stock task.
Principle
Stirring is the process of combining materials from different sources under the action of external energy, and its effect is affected by parameters such as material aggregation state, density, and viscosity. The Stirrer uses a motor to drive the Impeller to perform circular motion to dissolve and mix the homogeneous or solid particles in the compatible liquid. Accelerating the stirring speed can promote dissolving and increase the rate of chemical reactions, and is widely used in occasions where temperature or concentration differences of equilibrating are required.
Applications
Schools, universities, biotechnology, chemical, food, and other industries
Standards
Protection Rating IP40
Steps
Connect the device to an AC100~ 240V, 50/60Hz power supply.
2. Load a stirringrod (such as a three-blade helical Impeller) with a diameter of φ 2~ 10mm into the chuck and fix it.
3. Set the required stirring Rotation speed (range 30~ 2000rpm) through the knob, and the digital screen will display the setting value.
4. If necessary, set the running time (range 1 to 6000 minutes).
5. Start the device, start stirring, and the digital screen will display the actual output Rotation speed.
6. Rotation speed can be adjusted steplessly through the knob at any time during the experiment.
7. After reaching the set time or manually stopping, end the operation.
Notice
• Power supply voltage in the range of AC100~ 240V. Frequency 50/60Hz.
• The diameter of the stirringrod (paddle) should be between φ 2 and 10mm, and the penetration diameter should not exceed φ 8mm.
Processing capacity is up to 20L, medium viscosity range is 0~ 20000mPa · s.
• Ambient Temperature shall not exceed 40 ° C and relative humidity shall not exceed 80%.
• Equipment Protection Rating is IP40, please pay attention to the Operating Environment to prevent solid foreign matter from entering.
• When running at high load for a long time, the built-in overload protection will start, please ensure that the load is within the allowable range.
• Do not exceed Max. Torque when operating (13.1N.cm/39.0N.cm, see specifications for details).
• Please clean and maintain it in time after use and store it in an environment that meets the requirements of temperature and Humidity.
