Overview
YIHENG BCV-1FD Clean Bench is a single person vertical cleaning equipment that provides a dust-free and sterile local air purification working environment. It adopts an adjustable air volume fan system, which keeps the average air speed in the working area within the rated range by adjusting the working conditions of the fan, effectively prolonging the service life of the high-efficiency Filter.
Features
1. Transparent tempered glass windows on both sides of the cabinet to increase lighting performance
2. Slide the tempered glass window up and down from the equilibrate, which can be positioned arbitrarily
304 stainless steel worktop, easy to clean
4. Fan system with adjustable air volume
5. Good small air volume, high wind pressure, low noise fan
6. Using HEPA High Efficiency Filter, the closure efficiency of 0.3 μm particles is as high as 99.99%
7. Configure pre-Filter to extend the service life of high-efficiency Filter
8. Work area with lighting and ultraviolet sterilizing lamp
9. Configure a 1KW spare socket to provide convenience for the operator
Principle
The product drives the air flow through the adjustable air volume fan system, adopts the vertical air flow direction, and the air enters the working area after being purified by the pre-Filter and HEPA high-efficiency Filter, forming a dust-free and sterile clean environment to ensure that the working area reaches the ISO5 clean level.
Applications
Electronic technology, aerospace, precision instruments, meters, fine chemicals, food, etc
Standards
ISO5 clean grade standard
Steps
1. Power on AV220V/50Hz
2. Adjust the fan operating conditions to the appropriate air volume
3. Turn on the lighting or UV sterilizing lamp
4. Operate through self-equilibrating sliding glass windows
5. Turn off the power after use
Notice
• Regularly clean 304 stainless steel workbench
• Pay attention to the maintenance and replacement of pre-Filter and HEPA high-efficiency Filter
• Keep the work area closed during operation
• Avoid using more than 250VA of maximum power
• Note that the noise of the equipment is controlled below 62dB
