Overview
JY1002 Electronic Balance is a precision weighing instrument from the JINGQI brand. It uses a high-Stability strain sensor for accurate weighing and mass analysis. The product has a variety of functions such as unit conversion, counting and Automatic calibration, and can be connected to external devices through the RS232 interface.
Features
1. Adopt High Stability Strain Sensor with High and Low Temperature Aging Treatment to Ensure Accurate Weighing in Harsh Conditions.
2. Equipped with a limit protection device to prevent damage to the Sensor due to overload.
3. With intelligent software system, it can match different Sensors to ensure product conformity.
4. Adopt a specially developed linear and partial load error compensation system to reduce artificial weighing errors.
5. Using STN high contrast ratio liquid crystal display, the display is clear and sharp.
6. Support 9V dry battery power supply, flexible use.
7. Fully transparent design, larger weighing range, external power supply.
8. With backlight intelligent control and large font display, the reading is clear.
Principle
Electronic Balance converts the mass of an object into an electrical signal for measurement through a Sensor. The JY1002 model mainly uses a strain sensor, which has a relatively simple structure and low cost. It measures mass by sensing deformation.
Applications
Scientific research institutions, universities, biological, industrial and mining enterprises and other fields that require accurate weighing and mass analysis
Steps
1. Automatic boot detection.
2. Perform basic weighing and use the peeling function.
3. Use the counting function as required, and adjust the number of counted samples.
4. Can be converted between various units such as g (gram), kg (kilogram), ct (carat), oz (ounce), lb (pound), etc.
5. Automatic calibration (external calibrating) or linear calibrating (set weight needs to be configured).
6. Can be connected to a computer or micro printer through RS232 interface for data output.
Notice
* Power supply voltage is 220V/50Hz +/- 1Hz before use.
* When calibrating linearly, the set weight needs to be configured.
* Note that the product weighing range is 0~ 100g, please do not overload it.
Equipment with automatic fault alarm function, please check in time when an alarm occurs.
* Please keep and use Sensor Limit Protector properly.
