Please contact customer service
Sensor can detect up to 12 kinds of gases at the same time, any combination. Data storage capacity up to 120000 groups, support PPM,% VOL and other four units to switch freely, with dust and explosion-proof design.
Category : Gas Detector
Brand : KORNO
SKU : NB023284
Service :The delivery and service By NBCLab.Com
The KORNO GT-2000-VOC Gas Analyzer is a versatile, High Accuracy Portable inspection device. It can simultaneously detect up to 12 different gases, supports any combination of multiple Sensors, and has powerful Data storage and mobile printing capabilities for safety monitoring in a variety of industrial environments.
1. It can detect 12 different gases, and supports any combination of carbon monoxide, oxygen, ammonia, sulfur dioxide, hydrogen sulfide, carbon dioxide, methane, nitrogen oxide, nitrogen, VOC, TVOC, chlorine, nitric oxide and other gases. 2. A variety of different Sensors (including PM2.5 Dust Particle Sensor, Temperature and Humidity Sensor, etc.) can be expanded in any combination. 3. With large capacity Data storage function, can store data 120000 groups. 4. PPM,% VOL, mg/m3, mg/L four concentration units can be freely switched. 5. Support mobile printing function, which can be realized through built-in micro printer or external Bluetooth printer (optional). Automatic calibration, Sensor supports up to 6 levels of target point calibrating to ensure measurement accuracy and linearity, and has data recovery function. 7. Dustproof, explosion-proof, intrinsically safe circuit design, anti-static, anti-electromagnetic interference, through the national standard test and CMC Measurement equipment production license certification.
The analyzer adopts the pump-suction Sampling method to suck the gas to be tested into the inside of the instrument. The gas reacts with the built-in specific Sensor, which converts the chemical signal into an electrical signal, and displays the gas concentration in digital form after processing and analysis by the internal circuit of the instrument. The instrument supports a variety of Sensors, which can be flexibly combined according to the detection needs to realize multi-gas simultaneous detection.
Industrial safety monitoring, environment testing, chemical production, confined space operation, Emergency Response, Occupational Health Protection
GB3836.1-2010, GB3836.4-2010, CMC metrology authentication (Guangdong 00001052), intrinsically safe authentication (CNEx16.0537)
1. Boot self-test: Turn on the power of the instrument and wait for the system to complete the self-test. 2. Parameter settings: Set the detection gas type, concentration unit, Data storage mode (real-time or timing) as needed. 3.Calibrate: Automatic calibration by instrument software using standard gas (supports up to 6 levels of target point calibrating). 4. Sampling detection: Place the sampling Probe in the environment to be tested, and start the pumping function for gas sampling. 5. Data reading and recording: Observe the real-time concentration data on the display screen, and the instrument will automatically store the detection data. 6. Data output: Data reports can be printed on site through mobile printing function (optional). 7. Shutdown and maintenance: Turn off the power after the inspection is completed, clean the instrument and store it properly.
• Please read the instructions carefully before use to ensure that the instrument operates within the Ambient Temperature (-30~ 60 ° C). • Regularly calibrate the instrument to ensure the accuracy and Reliability of the test data. • Avoid use in environments with strong electromagnetic interference, high static electricity or extreme humidity, although the instrument has anti-interference and protection (IP65) capabilities. • This instrument is explosion-proof, but should be avoided in hazardous environments beyond its Protection Rating. • Sensors are precision components, please avoid impact or contact with chemicals that may damage the Sensor. • Optional printing function requires corresponding accessories (built-in micro printer or external Bluetooth printer) according to actual needs. The data recovery function can be used for unexpected situations, but it is recommended to back up important data regularly. • Net weight of the instrument 2.5Kg, please pay attention to safety when carrying and using.
[A] No, it isn't. This is the ex-factory price of the product in the Chinese Mainland. In addition to this price, buyers from different countries need to account for additional costs such as shipping fees, tariffs, and others. For specific regional quotes, please consult our customer service or fill out a quotation form.
[A] First, please click on the quotation form on the website and fill in detailed information. Our customer service personnel will then send you a quotation based on your specific country and region, confirming payment and delivery methods. Following this, we proceed with contract signing, payment, and shipment. You can then await delivery.
[A] After-sales repair for overseas instruments is an unavoidable issue. Our repair terms stipulate that the sender is responsible for the shipping and insurance costs incurred for the repair. Repairs within the warranty period are free, while repair costs beyond the warranty period are determined based on the actual situation.
