Overview
The SAFETAK GC90S-CO2 Single-point Wall-Mounted Gas Monitor Alarm is a 220V AC powered device designed to detect toxic, harmful, flammable and explosive gases in non-explosion-proof environments. It features corrosion-resistant die-cast aluminum housing, IP66 Protection Rating, maintenance menu password lock function, and optional relay signal output to connect to Miscellaneous control linkage equipment.
Features
1. Ultra-high Protection Rating: IP66 protection, good waterproof and dustproof performance, die-cast aluminum shell corrosion resistance, with strong electromagnetic Shielding performance.
2. High product mass: Sensor adopts international good brand, high detection accuracy and short reaction time.
3. High-intensity, diverse alarm system: the product has an audible alarm of up to 120dB; 360 ° high-intensity light alarm, which is clearly visible at a distance.
4. Two display modes are available: LCD and LED.
5. Humanized design: Maintain the menu password lock to prevent workers from misusing; optional relay signal output can be connected to other control linkage devices.
Principle
The alarm adopts electrochemistry principle Sensor to continuously detect the target gas. When the gas concentration reaches the preset alarm point, the device will trigger the sound and light alarm and output the corresponding electrical signal.
Applications
Petroleum, petrochemical, metallurgical and other industrial sites of non-explosion-proof places, gas stations, boiler rooms, laboratories, Food processing and other sites and office environments.
Standards
GB12358-2006 "Working environment Gas detection alarm instrument General technical requirements"
Steps
1. Install the device at the designated location and connect it to a 220VAC power supply.
2. After the equipment is powered on, it enters the preheating and self-test state.
3. According to site requirements, set relevant parameters (such as alarm points) through password-protected maintenance menu.
4. The equipment enters normal operation and continuously monitors the target gas.
Notice
• This product is suitable for non-explosion-proof environment, please do not use it in explosion-proof area.
• Installation and maintenance must be carried out by professionals.
• Regularly calibrate and maintain equipment to ensure detection accuracy.
• Pay attention to the working Ambient Temperature (-20~ 50 ℃) and Humidity (≤ 95% RH, no condensation) requirements of the equipment.
• Do not modify the maintenance menu password or perform operations that may cause equipment failure without authorization.
