Overview
CHNSPEC CS-200 is a general-purpose Handheld precision color difference meter. It adopts Sensor imported from Japan and information processing chip imported from the United States to ensure stable signal transmission. Measurement accuracy is up to 0.01. The instrument has a measurement diameter of 8mm and a measurement time of about 0.5 seconds. It is fast and accurate. It is suitable for internal and external color analysis evaluation and data control of enterprises. It has powerful functions such as large-capacity Data storage and multi-point test averaging.
Features
Professional design, powerful configuration: support multi-mode color value display, camera framing, ergonomic cortex design; large-capacity storage (100 sets of standard samples, each group of 100 samples); equipped with PC software; support USB, Bluetooth connection; can manually set the master standard LAB value.
2, cost-effective, access to national metrology authentication: support Chinese and English switching; display accuracy 0.01; repeability accuracy Delta E Standard Deviation value 0.08; with yellow whiteness test and black and white Adjustment; support multi-point sampling average test.
3, performance advantages: Compared with some imported instruments, it has a wider Measurement range, shorter Measurement time, larger storage capacity and smaller Standard Deviation.
Principle
CS-200 color difference meter adopts 8/d (8 ° illumination/diffuse reflection) illumination/reception system with specular reflection light (SCI). The measured object is placed in the test port, and after the instrument is illuminated with Illuminant, the Sensor collects the reflected light signal, which is processed and calculated by the MCU, and finally outputs the XYZ, LAB and other chromatic values of the measured object.
Applications
Painting field, plastic field, fiber dyeing, printing, architecture, ceramics, agriculture and forestry, food, academic research
Standards
Obtain national metrology authentication
Steps
1. Place the instrument firmly on a flat object.
2. Perform black and white calibrated (if applicable).
3. Place the tested object in the test port for measurement.
4. The average can be obtained through multi-point testing.
5. Connect PC software via USB or Bluetooth for data management.
Notice
• Operating Ambient Temperature is 0 ℃~ 45 ℃.
Storage environment should avoid condensation, relative humidity below 80% (35 ℃).
• Powered by 4 AA1.5V alkaline batteries, nickel-metal hydride batteries or a dedicated DC5V adapter.
• Ensure smooth contact between the test port and the tested object during measurement.
Periodically calibrated to ensure measurement accuracy.
