Overview
SDS-10 automatic spring tensile and compression testing machine is a professional testing equipment of SUNDOO brand. It combines advanced electronic technology and mechanical transmission technology, has accurate loading speed and wide force measurement range, and has High Accuracy and High Sensitivity in the measurement and control of load, deformation and displacement. The equipment is mainly used to load test the tensile and compressive forces of spring, rubber, reed and other resilience devices under a certain working length.
Features
1. High Accuracy Sensor to ensure test accuracy.
2. Equipped with imported digital AC servo system, high transmission efficiency, low noise and good Stability.
3. High Accuracy ball screw to improve transmission efficiency and displacement accuracy.
4. Equipped with two-speed preset function, enabling high-speed approach and low-speed acquisition.
5. After the test, it can automatically return to the starting point.
6. With a power-saving design that automatically shuts down without operation, the shutdown time can be set freely.
7. Support the automatic interchange of four units: N, kgf, lbf, and ozf.
8. Can store 10 sets of test data.
9. 3 sets of Linear dispersion data can be stored, and the data of each point can be viewed. The test report can be printed by the built-in micro printer.
10. With multi-point test function, stiffness can be tested and printed.
11. Provide manual, fixed force, positioning shift, fixed force cycle, positioning shift cycle, fixed force multi-point test, positioning shift multi-point test, a total of seven test modes to meet the various testing requirements of springs.
12. The upper and lower limit deviation values can be freely set and judged.
13. Equipped with 800 X 480 pixel TFT true color screen, peak value, real-time value and test process Linear dispersion display on the same screen, can monitor and trace the whole test process.
Principle
The SDS-10 automatic spring tension and compression testing machine drives the High Accuracy ball screw through the imported digital AC servo system to achieve accurate loading of the sample (such as spring). The system performs stretching or compression operations according to the set speed (range 0.5~ 500mm/min) and mode (such as fixed force, positioning shift, etc.), and the High Accuracy Sensor real-time measurement of force value and displacement, and displays the data synchronously with the process Linear dispersion on the TFT true color screen, and finally completes the testing and analysis of the mechanical properties of the resilience device.
Applications
Tensile and compressive load testing of resilience devices such as springs, rubber and reeds
Notice
1. Operating temperature should be maintained at 20 +/- 10 ℃.
2. The working environment should ensure that there are no seismic sources and corrosive media around.
3. Power supply voltage requirement is AC 220V +/- 10% 50Hz.
