Overview
SDS-100 automatic spring tensile and compression testing machine is a professional equipment of SUNDOO brand. It combines electronic technology and mechanical transmission, has accurate loading speed and force measurement range, and has High Accuracy and Sensitivity for measurement and control of load, deformation and displacement. The equipment is mainly suitable for load testing of tensile and compressive forces of spring, rubber, reed and other resilience devices under a certain working length.
Features
1. High Accuracy Sensor to ensure test accuracy.
2. Imported digital AC servo system with high transmission efficiency, low noise and good Stability.
3. High Accuracy ball screw, improve transmission efficiency and displacement accuracy.
4. Two-speed preset to achieve high-speed approach and low-speed acquisition.
5. After the test is completed, it can automatically return to the starting point.
6. Power-saving design for automatic shutdown without operation, with free shutdown time setting.
7. The four units N, kgf, lbf, and ozf are automatically exchanged.
8. Can store 10 sets of test data.
9. 3 sets of Linear dispersion data can be stored, and the data of each point can be viewed. The test report can be printed by the built-in micro printer.
10. With multi-point testing, print stiffness can be tested.
11. With manual, fixed force, positioning shift, fixed force cycle, positioning shift cycle, fixed force multi-point test, positioning shift multi-point test seven test modes to achieve various testing requirements of the spring.
12. The upper and lower limit deviation values are freely set and judged.
13.800 X 480 pixel TFT true color screen, peak value, real-time value and test process Linear dispersion display on the same screen, can monitor and trace the whole test process.
Principle
The testing machine drives the High Accuracy ball screw through an imported digital AC servo system to achieve accurate loading of spring and other resilience devices. The system uses High Accuracy Sensor measurement force value, and cooperates with the displacement measurement system to stretch or compress the sample within the set speed range (0.5~ 500mm/min). During the test process, the load, deformation, displacement and other data are collected, processed and displayed in real time on the TFT true color screen to meet different test needs through a variety of preset test modes.
Applications
Tensile and compressive load testing of resilience devices such as springs, rubber and reeds
Standards
The information does not mention
Steps
The information does not mention
Notice
• Operating temperature: 20 +/- 10 ℃.
• Working environment: no seismic source and corrosive medium around.
• Power supply voltage: AC 220V +/- 10% 50Hz.
