Overview
The HUXI FJ300-SH high-speed dispersed Homogenizer adopts a compact series-excited micro-high-speed motor to drive, which is suitable for further dispersing and homogenizing the pulverized experimental materials in the liquid medium in the laboratory. The machine is composed of a high-density die-casting aluminum alloy driving host, a good stainless steel refined dispersed homogeneous working head and a speed-regulating seat. It has the characteristics of high host driving speed, large output power, convenient loading and unloading of the working head, and easy experimental operation.
Features
1. Using a series-excited micro-motor with high output power and compact structure, the design is safe and reliable
2. All parts of the working head in contact with the material are made of good stainless steel, with good corrosion resistance
3. The working head adopts coupling to connect with the drive motor, which is easy and flexible to disassemble and assemble
4. The speed control base adopts stepless governor, which is convenient for speed regulation and stable operation
5. High host drive speed and high output power
6. The working head is easy to load and unload, and the experimental operation is simple
Principle
The device drives the homogeneous working head with high-speed swirl/spin through a series-excited micro-high-speed motor to disperse and homogenize the pulverized experimental materials in a liquid medium. The working head and the driving motor are connected through a coupling, and the speed control base is adjusted by a stepless governor to ensure stable operation.
Applications
Laboratory material dispersion homogeneity
Steps
1. Install the appropriate specification of the working head
2. Connect the working head connector to the drive motor
3. Adjust the height of the working head intrusion liquid
4. Turn on the speed control knob switch
5. Adjust the speed as needed
Step 6 Perform decentralized homogenization operations
7. Turn off the power after the operation is completed
Notice
● Duty Cycle is for intermittent use to avoid continuous long-term operation
● The height of the working head entering the liquid must meet the specifications
The processing capacity should be within the range of 100~ 13000ml
● The operating temperature must not exceed 120 ° C
Power supply must be AC 220V 50Hz
Check whether the connection of each component is firm before operation
