Overview
HM-35 infrared inoculation ring Autoclave is a high temperature sterilizing equipment of HUXI brand, which is specially used for rapid sterilizing and disinfection of inoculation rings, inoculation needles and other small items. It can completely replace alcoholburners and is easy and fast to operate. The equipment is suitable for biological safety cabinets, Laminar Flow Cabinets, extractor fans, mobile cars and other environments. It can be used stably even in harsh conditions in the field and can be sterilized at any time.
Features
1. Inoculation ring sterilizing is safe, convenient, and can safely replace alcoholburners;
2. The heating zone temperature can reach above 800 ° C, and sterilization only takes 5 to 7 seconds.
3. Small size, light weight, easy to operate, Appearance is beautiful, easy to clean, long service life;
4. Can be used in anaerobic chambers.
5. Adopt intelligent algorithms to extend heating life and improve safety.
6. Pottery and porcelain funnel deep ash organic matter, Pollution properties to prevent splashing and cross contamination.
Principle
HM-35 infrared inoculation ring Autoclave generates high temperatures above 800 ° C in the heating zone through infrared heating technology to quickly kill microorganisms. The equipment uses intelligent algorithms to control the heating process to ensure efficient sterilization while prolonging the service life. Pottery and porcelain funnel design can ash organic substances in the depth to effectively prevent splashing and cross-contamination.
Applications
Biological safety cabinet, Laminar Flow Cabinet, next to the exhaust fan, mobile vehicle, field environment
Steps
Connect the device to an AC220V power supply.
2. Wait for the heating time for about 15 minutes until the heating zone reaches the operating temperature;
3. Put the inoculation ring, inoculation needle and other small items into the heating area for sterilization for 5 to 7 seconds;
4. Turn off the power after use and clean the surface of the equipment.
Notice
• Ensure that the Ambient Temperature is within the range of 5 ° C to 40 ° C before use;
• Only suitable for small items with an outer diameter of no more than φ 35mm;
• Avoid operating in humid or flammable environments;
• Regularly check the status of the fuse to ensure safe use.
• Do not use corrosive cleaners when cleaning to prevent damage to the equipment.
