Overview
The vertical 304 stainless steel ball mill tank is used in the planetary Ball mill series products. It is made of national standard 06Cr19Ni10 stainless steel through multi-channel processing of precision lathe. The inner and outer surfaces and edges are polished, which has the characteristics of flat, Gloss, thick and durable, and has strong corrosion resistance, high temperature resistance, anti-sinking and anti-sticking. This product is one of the more commonly used grinding accessories of the laboratory planetary Ball mill.
Features
1. Made of 304 stainless steel, high temperature resistance, low temperature resistance, acid and alkali resistance, high Hardness.
2. Strong crushing ability, short grinding time and good grinding effect.
3. Low price.
4. Suitable for dry grinding and wet grinding.
5. With sealing design.
Principle
The stainless steel ball mill tank as a planetary Ball mill grinding container, by loading the grinding ball and the material to be ground, under the action of high-speed swirl/spin and revolution of the Ball mill, the impact between the grinding ball and the tank wall and the material, friction and shear force, to achieve crushing, mixing and grinding of the material.
Applications
Electronics, materials, machinery, chemicals, ceramics, cement, paints, graphite, dyestuff, coatings, Glass, iron powder, aluminum powder, aluminum oxide, Calcium Carbonate, calcium hydroxide
Standards
National standard 06Cr19Ni10 stainless steel
Steps
1. Select the appropriate grinding ball size (3-50mm) and ratio according to the material characteristics.
2. Put the material to be ground and the grinding ball into the stainless steel ball mill tank together.
3. Make sure the lid is tightly sealed.
4. Install the ball mill tank correctly on the planetary ball mill.
5. Rotation speed and time of Ball mill are set according to material characteristics and grinding requirements.
6. Start Ball mill for grinding.
7. After grinding, close the equipment, take out the ball mill tank, and separate the material from the grinding ball.
Notice
• The stainless steel ball mill tank will pollute the sample when grinding, and is suitable for hard, Tack liquid, brittle powder system samples that do not have strict requirements on sample purity.
• Temperature range is -100 ℃ to 300 ℃, do not use beyond the range.
• Please select the appropriate grinding ball material (304 stainless steel grinding ball is recommended) and specifications according to the material characteristics.
• Filling materials should not be too full, leaving enough ground space.
• Please make sure the tank is clean and drying before and after use to prolong the service life.
• Please ensure that the lid is well sealed during operation to prevent material leakage.
Do not use it beyond the maximum volume (4L).
