Overview
DECO-PFET-V-10L PTFE ball mill tank is made of PTFE material known as "Plastic King". The product has excellent Chemical Stability, Abrasion Resistance, corrosion resistance, sealing, high lubrication Tack, electrical insulation and Aging Resistance, and can work stably for a long time in a wide temperature range of -180 ° C to 250 ° C. Its material steel is soft and has low abrasion, which can effectively crush the material while ensuring that no contamination or damage to the sample is caused.
Features
1. The material has excellent self-lubrication, the ground is not sticky and easy to clean.
2. The material is safe and harmless, and can achieve non-polluting ground.
3. Hard and wear-resistant, with a long service life.
4. Stable chemical performance, suitable for grinding strong acid and strong alkaline samples.
5. Wide temperature range, anti-cracking and impact resistance at low temperatures, maintaining good Hardness and Abrasion Resistance at about 200 ° C.
Principle
The ball mill tank is a container that provides sample development space for the planetary Ball mill, and needs to be used with the grinding ball. During work, the sample and the grinding ball are subject to intense motion in the tank, and high energy is generated through continuous friction and collision, so as to realize the homogenization, crushing and mixing of the sample to achieve the required grinding effect of the experiment.
Applications
Chemical, machinery, electronics, aviation, materials, environmental protection, beauty, construction
Standards
Material purity: 99.8%, structure: 0.01%, sealing: 0.11
Steps
1. Select the appropriate grinding ball size (3-40mm) according to the sample characteristics.
2. Put the sample to be ground into the ball mill tank together with the grinding ball.
3. Can choose dry grinding or wet grinding method for grinding.
4. Install the ball mill tank with the sample installed on the planetary ball mill.
5. Start the Ball mill and complete the grinding process through the friction collision between the sample and the grinding ball in the tank.
6. After grinding, take out the sample and use the non-stick characteristics of the material to easily clean the ball mill tank.
Notice
• Please ensure that the operating temperature is within the specified range of -180 ° C to 250 ° C.
• The maximum loading volume is 10L, please do not overload.
• According to the nature of the sample (such as acid and alkaline) to confirm the applicability, although the chemical performance of this product is stable, it is still recommended to test in advance.
• Please ensure that the lid is well sealed when installing.
• When cleaning, please take advantage of its self-lubricating and non-stick characteristics to avoid scratching the inner wall with sharp tools.
