Overview
The YIHENG TUS-200P Oscillating Thermostatic Metal Bath is a microprocessor-controlled laboratory device that integrates thermostatic and oscillation functions. The device has an LCD screen and menu operation interface, Temperature range RT + 5~ 100 ℃, Temperature Uniformity ≤ +/- 0.3 ℃, Temperature Fluctuation +/- 0.2 ℃, Oscillation speed 200~ 1500rpm, suitable for a variety of Sample Handling needs.
Features
1. LCD screen, menu-type operation interface, multiple sets of data are displayed on one screen, and the operation is simple
2. With power-off recovery function, when the external power supply is powered off and calls again, the device can automatically resume operation according to the original setting program
3. Microprocessor control, good temperature control linearity, accurate oscillation speed, small fluctuation
4. With timing function, the foster time can be set arbitrarily within the range of 0 to 100 hours, the display screen shows the remaining time, and the timing end point emits an audible alarm signal
5. A variety of standard sample modules are available for easy replacement, and modules can also be customized according to user requirements
6. Short oscillation point dynamic function
7. DC brushless motor drive, long life, maintenance-free
Principle
The device precisely controls the temperature and oscillation parameters through a microprocessor, and uses a DC brushless motor to drive the horizontal rotation oscillation. When the temperature, speed and time parameters are set, the device maintains a constant temperature through a heating system, and the motor drives the sample module to oscillate according to the set speed and amplitude to ensure that the sample is evenly heated and mixed.
Applications
Sample Handling, Biological Fostering, Chemical Reaction, Sample Mixing, Temperature Control
Standards
Power frequency AC 220V 2.5A, 60/50Hz
Steps
1. Connect the power supply AC 220V
2. Select and install the appropriate sample module
3. Set the required temperature, speed and time parameters through the menu interface
4. Start the device running
5. After the timing is over, the device emits an audible alarm signal
6. Remove the sample and turn off the device
Notice
• Please use AC 220V power supply
• The maximum power of the device is 150VA
• Please confirm that the sample module is firmly installed before operation
• Timing function range from 0 to 99 hours and 59 minutes
• Temperature setting range is RT + 5~ 100 ℃
• Oscillation speed range is 200~ 1500rpm
• Equipment weight 5kg, please place it smoothly
