Overview
CQX 70 * 130 * 0.3 (Rounded Perforating) tinplate is a laboratory-specific tinplate. Appearance size is 70x130mm, Film thickness is 0.3mm, with rounded Perforating design. This product is widely used in the performance testing of industrial coatings, including adhesion, hardness, Impact, flexibility, bending and drying time tests. It requires film preparation on tinplate. Minimum order per kilogram, about 45 pieces per kilogram.
Features
1. Accurate dimensions: length 130mm, width 70mm, Film thickness 0.3mm to ensure test conformity.
2. Rounded Perforating Design: The corners are rounded and Perforating to enhance safety and ease of operation.
3. Laboratory-specific: suitable for a variety of coating performance testing, such as adhesion, hardness, Impact, etc.
4. Sales by kilogram: flexible minimum order, about 45 pieces per kilogram to meet different needs.
Principle
The tinplate sheet as a film carrier, in industrial coatings testing, coating Spreader uniform film formed on its surface, by subsequent testing to evaluate the physical performance of the coating, such as adhesion, hardness, etc., to ensure that the coating mass standards.
Applications
Industrial coatings performance testing, laboratory testing
Steps
1. Prepare tinplate to ensure that the surface is clean and free of contamination.
2. Spreader the paint evenly on the surface of the tinplate sheet.
3. According to the test requirements drying film.
4. Conduct adhesion, hardness, Impact and other performance tests.
Notice
• Check whether the surface of the tinplate is flat and free of defects before use.
• Spreader coating should be uniform to avoid bubble or Film thickness unevenness.
• When booking by kilogram, pay attention to about 45 pieces per kilogram, and estimate the dosage reasonably.
• Keep drying during storage to prevent rust from affecting test results.
