Overview
RONGHUA INSTRUMENT CJ-1A digital display speed measurement Magnetic Stirrer is easy to operate, adopts stepless speed regulation technology, and can perform precise and stable Stir on liquid solutions in a wide speed range of 0~ 2400rpm, especially suitable for small volume sample testing. The equipment is a satisfactory tool for modern petroleum, chemical, environmental protection, biochemistry, experimental analysis, education and scientific research.
Features
1. Easy to operate, stepless speed regulation
2. Wide stirring speed range (0~ 2400rpm)
3. Stirring performance
4. Especially suitable for small sample testing
5. Digital speed measurement working mode
6. Single station design, the size of the working plate is about 125cm.
Principle
The Magnetic Stirrer controls the stirring speed through a stepless speed control system, and uses the principle of magnetic coupling to drive the Stir to swirl/spin in the liquid to achieve uniform Stir of the solution. The digital speed measurement function can display the current stirring speed in real time to ensure the accuracy of operation.
Applications
Petroleum, chemical industry, environmental protection, biochemistry, experimental analysis, education and research
Steps
1. Place the equipment on a stable work surface
2. Turn on the power supply and turn on the power switch
3. Place the container with the sample and Stir on the work plate
4. Set the desired stirring speed through the speed knob
5. Observe the speed reading on the digital display screen and adjust to the target value
6. After use, adjust the speed to zero and turn off the power
Notice
• Please ensure that the work surface is flat and stable before use
• The stirring speed should be gradually increased from low speed
• Avoid use in humid or dusty environments
• Clean the surface of the working plate in time after use
Do not move or tilt the device while it is running
• If any abnormality is found, stop using it immediately and check it
