Overview
Digital thermostatic oil bath is widely used in distillation, drying, condensing and impregnation of chemical products or biological products, is a large and medium-sized institutions, environmental protection, scientific research, petroleum, metallurgy, chemical and other units required test equipment.
Features
1. Temperature range, up to room temperature to 300 ℃.
2. Tank capacity is large, size is 43 * 28 * 30cm.
3. Heating power is strong, with a total Power of 5000W.
Principle
The device heats the heat transfer oil in the Tank through the built-in heating element, and uses the digital display temperature control system to precisely adjust and maintain the oil bath temperature, providing a stable and uniform thermostatic environment for Sample Handling.
Applications
Universities, environmental protection, scientific research, petroleum, metallurgy, chemical industry
Steps
1. Add an appropriate amount of heat transfer oil to the Tank.
2. Turn on the power supply and turn on the power switch of the device.
3. Set the required target temperature through the digital display panel.
4. Start heating, the device will automatically heat up to the set temperature and remain thermostatic.
5. Place the sample to be treated in an oil bath for experimentation.
6. After use, turn off the heating and power supply, and handle it properly after the oil temperature is cooled down.
Notice
• Before use, please ensure that the oil in the Tank is sufficient to avoid dry burning.
• Please select the appropriate heat transfer oil according to the experimental requirements and check and replace it regularly.
• The temperature of the equipment is high when working, do not touch the heating tank and internal heat transfer oil to prevent burns.
• Before moving or cleaning equipment, always disconnect the power and wait for it to chill down completely.
• Please place the equipment on a smooth, ventilated countertop for use.
• Non-professionals should not disassemble or modify the internal structure of the equipment.