Overview
LANYU LYM250W-T is a brushless DC constant speed Stirrer designed for laboratories. Equipped with a high-definition TFT LCD screen and capacitive touch buttons, the product is easy and fast to control, with torque display function, Operating voltage is universal worldwide, and supports continuous operation.
Features
1. Driven by a brushless DC motor, the output power is 250W.
2. Equipped with high-definition TFT LCD screen and capacitive touch keyboard, the control is intuitive and convenient.
3. Rotation speed dynamic detection and memory function.
4. Support stepless speed regulation, Speed range 30~ 2000rpm.
5. Timer Range, up to 1~ 6000 minutes.
6. Equipped with overload protection safety function.
7. Use the rotating chuck to fix the Impeller, and the clamping range is 2~ 13mm.
8. Processing capacity 30L, can handle the maximum viscosity of 100000Mpa.s.
Principle
The Stirrer is powered by a brushless DC motor, which drives the rotor chuck to drive the Impeller swirl/spin. The user sets the Rotation speed and timing through the capacitive Touchscreen, and the system monitors and maintains the set Rotation speed in real time through dynamic detection to achieve constant speed stirring. Its overload protection function can automatically stop in case of abnormality to ensure the safety of the equipment.
Applications
Laboratory material mixing, chemical industry, food, pharmaceutical, scientific research
Standards
Duty Cycle meets S1 (continuous) standard
Steps
Connect the device to AC 100~ 240V power supply.
2. Load the Impeller into the rotary chuck (clamping range 2~ 13mm) and fix it.
3. Rotation speed (30~ 2000rpm) set by capacitive Touchscreen.
4. If timing is required, set the Working time (1~ 6000min).
5. Start the equipment and start stirring.
6. Rotation speed and torque are observed in real time through the TFT screen.
7. After the work is completed or at the end of the schedule, the device stops and the Impeller is removed.
Notice
• Please ensure that the working Ambient Temperature ≤ 40 ℃, relative humidity ≤ 80%.
• Do not exceed the maximum Processing capacity of 30L and the maximum viscosity of 100000Mpa.s.
• Please confirm that the Impeller is firmly installed in the chuck before use.
• Pay attention to the overload protection function of the equipment to avoid long-term overload operation.
Before cleaning and maintenance, be sure to disconnect the power supply.
