Overview
LANYU LYM200W-T is a laboratory electric Stirrer, using a three-core processor intelligent control main board and a 2.8-inch TFT true color touch screen, which can display voltage, Frequency, Current, Power and Torque Linear dispersion in real time to ensure accurate experimental data. The device has overload and overcurrent protection, self-test, timing, memory and other functions, supports preset Rotation speed and stepless speed regulation, and is easy to operate.
Features
1. Adopt three-core processor intelligent control main board and 2.8-inch TFT true color touch screen, intuitive control.
2. Real-time display of Voltage, Frequency, Current, Power and Torque Linear dispersion, accurate data.
3. With overload and overcurrent protection, local self-test, timing, memory and other functions.
4. Rotation speed can be preset and suspended at any time, supporting stepless speed regulation from 50 to 2000rpm.
5. Using brushless DC motor, Max. Torque reaches 145N.cm.
6. Processing capacity range (50~ 40000ml), can handle the maximum viscosity of 100000mpa.s.
Principle
The electric Stirrer is driven by a brushless DC motor, and the intelligent control main board receives operation instructions from the touch screen to control the set Rotation speed and torque of the motor output. The Impeller is fixed and swirled/spun by the rotating chuck to stir and mix the material. The system monitors the operating parameters in real time and ensures that the equipment works under safe conditions through a protection mechanism.
Applications
Laboratory material mixing, chemical industry, food, pharmaceutical, scientific research
Steps
Connect the power supply (AC 100~ 230V).
2. Turn it on through the 2.8-inch true color touch screen and conduct self-inspection.
3. Select or call the memorized Rotation speed and other parameters, or directly set the required Rotation speed (50~ 2000rpm).
4. Install the Impeller (clamping range 2~ 13mm) to the rotary chuck and fix it.
5. Impeller in the material to be processed.
6. Start stirring, and the parameters can be suspended or adjusted at any time during operation.
7. The timing function can be used to automatically stop when the set time is reached.
8. Shut down and disconnect the power supply after use.
Notice
• Power supply voltage in the range of AC 100~ 230V.
• Ambient Temperature shall not exceed 40 ° C and relative humidity shall not exceed 80%.
• Impeller must be firmly installed, and the clamping diameter must be within the range of 2~ 13mm.
Processing capacity is recommended to be between 50 and 40000ml, and the viscosity should not exceed 100000mpa.s.
Equipment has overload protection, do not overload operation.
• Be sure to disconnect the power supply before cleaning and maintenance.
