Overview
LANYU LYD500W-T High Speed Dispersion Homogenizer is a laboratory equipment. It adopts a three-core processor intelligent control main board and a 2.8-inch TFT true color touch screen. It can display the voltage, frequency, current, power and torque Linear dispersion diagram in real time to ensure accurate experimental data. It has functions such as overload and overcurrent protection, self-test, timing, memory, etc. It supports preset speed and pause operation. The working head can be removed for easy replacement, cleaning and sterilization. The fuselage is injection molded from engineering plastics, which is safe and reliable. The no-load speed range is 1000-28000rpm.
Features
1. Three-core processor intelligent control main board and 2.8-inch TFT true color touch screen
2. Real-time display of voltage, frequency, current, power and torque Linear dispersion
3. Overload and overcurrent protection, local self-test, timing, memory function
4. The speed can be preset and paused at any time, and the speed digital display is easy to operate
5. The working head is removable, easy to replace, clean and sterilize
6. The fuselage is injection molded from engineering plastics, which is safe and reliable
7. No-load speed range 1000-28000rpm, stepless speed regulation
Principle
The device is driven by a brushless DC motor, and the stepless speed control is carried out through the touch knob to achieve high-speed dispersion and homogeneity. When working, the output torque of the motor is transmitted to the working head through the Stir shaft, and the material processing is carried out within the set speed range. At the same time, the intelligent control main board monitors the operating parameters in real time to ensure stability and accuracy.
Applications
Laboratory dispersion and homogenization
Standards
Rated voltage AC220V, rated frequency 50/60HZ
Steps
1. Connect the power supply and turn on the device.
2. Set the speed and timing parameters through the touch screen
3. Install the working head and start running
4. Real-time monitoring of display parameters, which can be paused at any time
5. After completion, disassemble the working head for cleaning and sterilizing
Notice
• Ambient Temperature not exceeding 40 ℃
• relative humidity not exceeding 80% RH
• Processing capacity range is 80-5000ml
• Make sure the overload protection function is normal before use
• The working head is made of SS316 stainless steel and requires regular maintenance
