Overview
LANYU LYD500W-T High Speed Dispersion Homogenizer is a laboratory equipment, equipped with a three-core processor intelligent control main board and a 2.8-inch TFT true color touch screen, which can display voltage, frequency, current, power and torque Linear dispersion in real time to ensure accurate experimental data. The machine has overload and overcurrent protection, self-test, timing, memory and other functions, supports preset speed, pause operation, and convenient speed digital display. The working head can be removed for easy replacement, cleaning and sterilization. The fuselage is made of engineering plastic injection molding, which is safe and reliable.
Features
1. Three-core processor intelligent control main board and 2.8-inch TFT true color touch screen, real-time display voltage, frequency, current, power and torque Linear dispersion diagram.
2. With overload and overcurrent protection, local self-test, timing, memory and other functions.
3. The speed can be preset and paused at any time, and the speed digital display is easy to operate.
4. The working head is removable, easy to replace, clean and sterilize.
5. The fuselage is injection molded by engineering plastics to ensure safety and reliability.
6. DC brushless motor drive, stepless speed range 100~ 28000rpm, output power 500W.
Principle
The high-speed dispersed Homogenizer is driven by a DC brushless motor to achieve stepless speed regulation, with a speed range of 100~ 28000rpm. Combined with the processing signal of the intelligent control main board, the voltage, current, frequency and power are monitored in real time to ensure stable operation. The working head disperses and homogenizes the material under high-speed swirl/spin, and the torque output is up to 18N cm, which is suitable for a variety of experimental conditions.
Applications
Laboratory Stirring, Material Dispersion, Homogenization
Steps
1. Connect the power supply and ensure the rated voltage is AC220V.
2. Set the desired speed and Timer Range through the touch knob.
3. Start the device and monitor the display parameters in real time.
4. Settings can be paused or adjusted at any time.
5. Remove the working head after use for cleaning and sterilizing.
Notice
* Ensure that the Ambient Temperature does not exceed 40 ° C and the relative humidity does not exceed 80% RH.
To avoid overload use, the device is equipped with an overload protection function.
* The working head material is SS316 stainless steel, pay attention to cleaning and sterilizing when using.
Follow safety regulations when operating to prevent accidents.