Overview
The CHNSPEC CS-800 Colorimeter is a high-performance Benchtop color difference meter with a test diameter facing up and a measurement diameter of 11mm. It integrates full-band LED composite Illuminant, dual-path spectroscopy system and ETC real-time calibrating technology. It has High Accuracy and Stability. It is suitable for color difference measurement and color analysis in coatings, printing, Spinning & weaving, plastics, food, products, automobiles and other fields.
Features
1. Geometry conditions observed by D/8 illumination, SCI and SCE can be measured simultaneously.
2. The test diameter is designed upward, which is convenient for the measurement of samples in various states such as solids, particles, powders, pastes, etc.
3. Using ETC real-time calibrating technology to ensure long-term measurement Stability and data accuracy, spectral reflectance Standard Deviation within 0.08, chromatic value Delta E * ab MAX Maximum 0.03, Inter-instrument Agreement within 0.2.
4. Equipped with 5-inch true color display, Operating interface is simple.
5. Using CLEDs full-band Balanced LED Illuminant, the lifespan is up to 10 years or 3 million measurements.
6. Large storage space, capable of recording 40,000 test data.
7. Support USB connection to PC software for easy data management, analysis, and report generation.
8. Low power consumption design, equipped with large capacity rechargeable lithium battery, continuous measurement 20000 times.
9. Can be connected to a micro printer for printing.
10. Obtain domestic metrology authentication.
Principle
CHNSPEC CS-800 Colorimeter uses D/8 (scattering Illuminant, 8 degree viewing angle) to illuminate observation Geometry conditions. Its SCS Optical inspection engine (spectroscopic integrated system) combines with a dual-path array Sensor to analyze the light spectrum of sample reflection. The instrument uses CLEDs full-band equalized LED Illuminant illumination and ETC real-time calibrate technology to calibrate the system at each measurement to ensure stable and accurate data. It can synchronize the measurement of data including mirror reflection component (SCI) and mirror reflection exclusion component (SCE).
Applications
Paint, printing, Spinning & weaving, Plastic, Food, Products, Automotive
Standards
Obtain domestic metrology authentication
Steps
1. Boot preparation: ensure that the instrument has sufficient power and is in a suitable operating environment (0~ 45 ° C, relative humidity 80% or lower).
2. Sample placement: according to the sample state (solid, granular, powder, paste) directly placed on the upward 11mm measurement port, or placed in the culture dish and then placed in the measurement port.
3. Calibrate and measurement: The instrument adopts ETC technology, which will automatically calibrate in real time before each measurement. Align the sample, trigger the measurement, and get the result in about 0.5 seconds.
4. Data viewing and analysis: Light spectrum, chromatic value, color difference value, qualified/unqualified results and other information are viewed through the 5-inch true color screen.
5. Data management: You can connect to a PC via USB and use the supporting software for more in-depth Data analysis, comparison, report generation or management of Color data.
6. Data storage and output: measurement data is automatically saved (up to 40,000 pieces), and reports can be printed with a micro printer.
Notice
• Please ensure that the operating Ambient Temperature is between 0 and 45 ° C, the relative humidity is 80% or less (35 ° C), and there is no condensation.
Storage Ambient Temperature should be between -25~ 55 ℃, relative humidity of 80% or less (35 ℃), no condensation water vapor.
• When measuring powder, granular or paste samples, it is recommended to use a culture dish to avoid sample contamination of the instrument measurement caliber.
• Instrument weight is about 4.5kg, please pay attention to safety when moving and placing.
• Please use the original charger to charge the built-in lithium battery to ensure Battery life and instrument safety.
When connecting to a PC or printer, use the specified interface and ensure a stable connection.
• Regularly clean the instrument housing and measurement caliber to keep it clean and avoid the use of corrosion cleaners.
• If not used for a long time, it is recommended to store the instrument in the specified storage environment and charge and maintain the battery regularly.
