Overview
WGZ-1000 turbidity is a JINGQI brand High Accuracy measuring instrument. It adopts imported high-performance Illuminant and narrowband filter system, and has excellent Optical inspection stability and anti-interference ability. The instrument is equipped with a large-screen LCD Chinese display and Chinese menu operation interface, supports data storage and transmission functions, and is suitable for various turbidity measurement scenarios.
Features
1, using imported high performance, long life (100,000 hours), high luminance Illuminant, with narrow band filter system, Optical inspection stability, not easily disturbed by various light, instrument accuracy and stability.
2. Large-screen LCD Chinese display, Chinese menu operation, simple and intuitive.
3, can save the standard Linear dispersion 10 and 500 measured values, power is not lost.
4. The main engine case is made of ABS material after mould, which has good corrosion resistance.
5, using high performance, low power consumption 16-bit microcontroller system, good performance.
6. With printing function and USB interface upload function.
Principle
The instrument uses imported high-performance Illuminant to emit rays of light, penetrates the interference light through the narrow-band filter system, and detects the scattering degree of the sample to the ray of light to determine the turbidity value. Optical inspection signals are processed by the high-performance single-chip microcomputer system and the calculation results are displayed to achieve accurate turbidity measurement.
Steps
1. Turn on the power supply and start the instrument.
2. Select the measurement mode through the Chinese menu or call the standard Linear dispersion.
3. Put the sample to be tested into the measurement cell.
4. Read and record the measurement results.
5. Optional to print data or upload data through the USB interface.
Notice
• Power frequency to meet AC (220 +/- 10%) V requirements
• Ambient Temperature should be kept within 5~ 40 ℃
• The relative humidity should not exceed 70%
• Avoid direct exposure to strong light on the instrument
• Optical inspection components are cleaned regularly to ensure measurement accuracy
• Turn off the power in time after use