HUANGYI HYQC-1500 1.5 cubic Meters environment test Chamber Glass environment Chamber, stainless steel frame 10mm float Glass

Name: HUANGYI HYQC-1500 1.5 cubic Meters environment test Chamber Glass environment Chamber, stainless steel frame 10mm float Glass
Brand: huangyi
SKU: NB024242
Price: 4592.0 USD
Availability: InStock

$ 4592.00Ex works

Adopting stainless steel frame and 10mm float plate Glass structure, the gas leakage rate is less than 0.5% of the box volume at 1000 Pa per minute, and the surface is smooth and clean without adsorption, ensuring accurate and reliable test data.

Model

HYQC-1500

Get Quote

Category : Formaldehyde Climate Chamber

Brand : huangyi

SKU : NB024242

Service :The delivery and service By NBCLab.Com

Overview

HUANGYI 1.5 cubic meters environment test chamber HYQC-1500 is an Environmental performance equipment that complies with QB/T 2761-2006 "Method for Determination of Purification Effect of Indoor Air Purification Products". The cabin is composed of stainless steel frame and 10mm float plate Glass to ensure no background interference and Memory effecy, the surface is smooth and clean and no adsorption material, and the cabin door adopts airtight non-adsorption sealing strip to ensure sealing.

Features

1. Adopt stainless steel frame and 10mm float plate Glass, no background interference and Memory effecy 2. Smooth and clean surface, no adsorption material 3. The door uses airtight non-adsorption sealing strips, and the sealing performance is good 4. Low gas leakage rate, less than 0.5% of the box volume per minute at an overpressure of 1000 Pa 5. Fully equipped, including stainless steel sample holder, fluorescent lamp, fan and sampling port 6. The air sampling system is controlled by copper joints and ball valves, located at a height of 1.3m above the bulkhead

Principle

The test cabin is sealed by stainless steel frame and Glass structure, and the air circulation is promoted by fans. Air samples are collected through the sampling system to determine the purification effect of indoor air purification products. The cabin sealing design ensures that the gas leakage rate is controlled within the standard range during the test process.

Applications

Determination of purification effect of indoor air purification products

Standards

QB/T 2761-2006 "Method for determination of purification effect of indoor air purification products"

Steps

1. Prepare the test sample and place it on the stainless steel sample rack 2. Close the hatch and use the compression handwheel to tighten the sealing 3. Start the fan and fluorescent lamp to simulate the test environment 4. Air sampling through the ball valve control of the sampling port 5. Record and analyze test data

Notice

• Make sure the hatch is well sealed to prevent gas leakage • Check whether the ball valve of the sampling system is working normally before sampling Maintain a stable environment during testing to avoid external interference • Regularly clean the surface of the cabin to prevent contamination from affecting the test results

Test chamber material
Stainless Steel Frame, 10mm Float Glass
gas leakage rate
Under an overpressure of 1000 Pa, the gas leakage rate is less than 0.5% of the box Volume per minute; under use, the gas leakage rate is less than 1% of the supply gas flow.
Doors and Flanges
Use two compression handwheels to tighten the sealing
configuration structure
Test chamber plus stainless steel sample holder, fluorescent lamp, fan, and sampling port
Air sampling system
The sampling holes are located at a height of 1.3m from the bilge, a Total of three, on the left bulkhead. Material is copper joint, ball valve control
Inner Size
900W*1850H*900Dmm
Test box Volume
About 1500L

[Q] Is the price listed on the website the final cost for overseas purchases?

[A] No, it isn't. This is the ex-factory price of the product in the Chinese Mainland. In addition to this price, buyers from different countries need to account for additional costs such as shipping fees, tariffs, and others. For specific regional quotes, please consult our customer service or fill out a quotation form.

[Q] What is the specific process for purchasing the product?

[A] First, please click on the quotation form on the website and fill in detailed information. Our customer service personnel will then send you a quotation based on your specific country and region, confirming payment and delivery methods. Following this, we proceed with contract signing, payment, and shipment. You can then await delivery.

[Q] What should I do if the instrument I purchase needs repair?

[A] After-sales repair for overseas instruments is an unavoidable issue. Our repair terms stipulate that the sender is responsible for the shipping and insurance costs incurred for the repair. Repairs within the warranty period are free, while repair costs beyond the warranty period are determined based on the actual situation.

CATEGORIES