Overview
The micro drop tester (model NBC-5619B) is a factory direct sales product designed for small electronic consumer products such as mobile phones, telephone handsets, walkie-talkies, MP3s, CDs, electronic dictionaries, etc. The machine uses Japan's Shinano motor as the drive source, combined with pneumatic components and PLC programmable controller to achieve efficient and consistent test performance.
Features
1. The number of times can be set to automatically stop the test
2. The drop surface is made of aluminum material, the thickness is 12mm, and the baffle at the drop is reset
3. Using Japan's Shinano motor as the driving source, durable use
4. Adopt pneumatic components and authoritarian Control mode to improve Test speed and conformity
5. Equipped with a display-controlled LCD touch control panel and a PLC programmable controller to achieve motion programming
6. Automatic counting, automatically stop the test when the set number of times is reached
Principle
The motor drives the upper fixture (air finger) down to clamp the mobile phone. After rising, release the air finger, and the mobile phone falls freely. The double-acting cylinder telescopic pushes the mobile phone to the clamping position of the fixture. The motor drives the upper fixture down again to clamp the mobile phone. After rising, it is released, and the mobile phone falls freely again. This process is repeated until the set number of times is reached.
Applications
Mobile phone, telephone handset, walkie-talkie, MP3, CD, electronic dictionary
Steps
1. Set the number of tests and parameters
2. Start the machine, and the motor drives the upper fixture down to clamp the product.
3. Free fall after the product rises
4. Double-acting cylinder reset product position
5. Sexual repeability drop process until the set number of times
6. Automatic stop test
Notice
• Ensure that the air source pressure is ≥ 0.5Mpa
• Specimen weight not exceeding 2.5kg
• Power supply using AC 220V or specified voltage
• Regularly inspect pneumatic components and electrical components
• Pay attention to safety during operation and avoid accidentally touching moving parts
